Mike Ellis
TDR MEMBER
Ran across news of another recent recall, thought I would post it here in case some of you might have a CCP.
http://www.waltherarms.com/walther-resources/ccp-recall/#
For those of you who might have one, the link has photos of the milled dot location.
http://www.waltherarms.com/walther-resources/ccp-recall/#
CCP Recall
Re: Important Safety Recall – MARCH 2017 Walther CCP Pistols
Walther Arms has identified a potential condition in Walther CCP pistols that could potentially cause it to discharge if dropped whether the manual safety is engaged (on) or disengaged (off). The safety of our customers is our paramount concern so we have voluntarily initiated this recall because of the possibility of a drop-fire occurring.
Please do not load or fire your Walther CCP pistol and contact us immediately to arrange to have your pistol upgraded free of charge.
If your pistol has already been upgraded, there will be a dot milled onto the back side of the magazine opening.
For those of you who might have one, the link has photos of the milled dot location.