Here I am

weak preassure valve

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

dtt supplier in oregon?

Status
Not open for further replies.
I am getting a small prolong crank sometimes. I had been running a pressure box for about 5k miles and I stoped, only to use it for raceing. If theat souds like a weak valve can i shim it or is that a no no? thanks for your info anything halps.
 
it's real easy to check, get a socket and remove the banjo bolt on top of the valve (dont loose the washer) and start the truck. if it leaks,it's bad.

pretty easy huh?
 
600 hp on drugs! But it was well worth the price of admission to watch that dyno pull if you know what I mean. :--)
 
Last edited:
sick_ram said:
ok checked it it is leaking. Is there a quick fix until i get my new one or am I stuck. [ can i shim it.





since you have an ancient chinese secret for mod's than i would call wade, user name "diesel power"and get a rail cap!!!
 
Last edited:
ok I will do that. OK now I got another problem. It happend after a drag race. I have a really prolong start, rough idle and low oil preassure and white smoke I thought it was the turbo but it is still goood. ? does that sound like a fuel problem or bad engine.
 
#ad
hope this comes out but here is a view from the fuel system on the older out of tank lift pump sytems shows where all the parts are located
 
Last edited by a moderator:
Well I just droped it off at the dealer this afternoon, with all of the bombs on they are probably going to freck out. I quess I am going to have fo grab my anckles on this one. And my bad the truck has good oil preassure. I am thinking it sound like like a bad injecter, there is a moderate amount of white smoke coming and it sounds like its have a crazy cam in it.
 
Status
Not open for further replies.
Back
Top