Westach fuel pressure sending unit ?

[TRAMPLINEMAN]

On an '06, could someone tell me where to hook up the fuel side of the sending unit. There aren't any ports on the top of the filter housing and I can't bring myself to tear into the injection pump without some form of direction. Thanks, Mike

 

[wyosteve]

Geno's Garage sells a billet fuel filter replacement cap that has the port in it for the sending unit. About $60 I recall.

 

[TRAMPLINEMAN]

Thanks, but I'm hoping for a different option. The filter cover screws off, so every time I need to change the filter, I'd have to disconnect the sender. I'm hoping someone knows of a location to where I can connect it permanently.

 

[nickleinonen]

Thanks, but I'm hoping for a different option. The filter cover screws off, so every time I need to change the filter, I'd have to disconnect the sender. I'm hoping someone knows of a location to where I can connect it permanently.

banjo bolt that is tapped. install it in the line to the cp3 [either at the cp3 or base of the filter housing]



or put it on the billet filter lid, but put a hydraulic quick connect fitting there so all you have to do is snap the fitting off without messing with electrical connections

 

[TRAMPLINEMAN]

banjo bolt that is tapped. install it in the line to the cp3 [either at the cp3 or base of the filter housing]

Thanks! I've got the banjo bolt from Genos and kinda figured where it went but wanted to make sure. Thanks again, Mike