2nd Gen Non-Engine/Transmission What happens when you hit a Nissan with a Ram 2500

[MCrossley]

This...

#ad




No it was not my fault... :{

 

[dresslered]

It's sad to see 'ol Taz with a droop on his face, but you have to admit, the horns do add a nice touch. You can rebuild it better than before! Replace the factory tin foil with some real metal! Glad nobody was injured.



P. S. Also, make sure that both headlight assemblies are damaged so that you can add some quads.

 

[Thomas]

Something in the front receiver with a little more heft and surface area than the TDR plug might have saved the day.

 

[MCrossley]

your right like a winch... Actually David the Quads are already on their way...

 

[lpearson]

Originally posted by MCrossley

your right like a winch... Actually David the Quads are already on their way...

The front end of the Nissan is what my Ram looked like when a Semi cut me off and I slid into the back of him.



Rebuilding now----what are Quads?



Thanks,

Lowell

 

[CFast]

dodge 1

nissan 0



What are quads?

 

[MCrossley]

Quads I am referring to the Sprt headlamps, they have a 2 bulbs per fixture vs. the single one like I have now.

 

[RobertBolinger]

Did it not set off the airbags in the Nissan?

 

[BigBadDodge]

Dude, glad your okay.



How is the radiator, transcooler, intercooler ?



road armor



BBD

 

[DOverton]

Will the quads fit the 98 3/4 ton ram? Looking for improvements in the headlight dept. Thanks.



Dallas...

 

[MCrossley]

With minor sheet metal mods you can fit the sport lights into any year 94-02 and you need a wiring harness. Do a search on TDR for Sport headlights and you will get more threads than you can deal with... No airbag deployment we were only doing about 15mph a piece and basically head on so 30 or so impact. Everything is working on my truck even the A/C and it is bent. The intercooler however does have a small leak as I can hear it at high boost.

 

[tntway]

Mike--do you need Redneckdr's wiring instructions???... ... i have them for the switched ground system but NOT the older trucks.

 

[dresslered]

Mike, I'm sure you already know that sheetmetal mods are NOT required for your year of truck. It is simply plug n' play after you build a custom harness!

 

[dlange]

My friends looked the exact same way when he hit a deer at 70, but he also rolled it on its side. But he has drove it just like that for over 2 years. About the only thing not dented are the twin stacks!! What a madman. And no, he doesnt get to drive mine





Good luck gettin her fixed.

 

[MCrossley]

Yes I am aware that mine does not require the mods, I should have phrased it better the 99 and under trucks require it and not that much work either. I would love to have the diagram mentioned earlier although I may just buy the harness as it is fast and cheap...

 

[GFrance]

Time for a real front bumper.

Check out mine at www.nwbombers.com in the anything else forum under slip slidding away.

 

[MCrossley]

The Ute is the exact bumper I am thinking of I spoke with them over e-mail and they were great twork with; my only problem is that it looks like the body shop is not going to see things my way about me getting the parts to save some huge $$$ which would have offset a great deal of the cost...

 

[C. Harlan]

my front end looked the same way after I hit a porsche who cut into my lane, leaving me no stopping room. . it was his fault, so thats a good thing.