What size houseing on HT3B?

[Lucas5477]

Anyone know what size ehaust houseing this is? It is off a HT3B Garrett Turbo. Part number 144403-0000 S/N GKM30842.

 

[Lucas5477]

Has the 27 stamped in side too.



Lucas

 

[Got Smoke?]

Has the 27 stamped in side too.



Lucas

That's what I was thinking too when I saw the 27, but think about it? Mostly what you hear are even #'s up on into the twenties, but did they make a 27?

 

[Lucas5477]

That's why I was wanting to know. The guy I got it from said the thought it was a 26 but was not sure. I don't know if they made a 27 or not. There is also a 21 and 23 on the out side as you can see.



Lucas

 

[BPonci]

It looks to be a divided housing. Probibly a 26cm.

 

[Forrest Nearing]

the following are the sizes I've seen... U = undivided, D = divided...



22-U, 23-D, 26-U, 27-D, 32-U, 36-U



Forrest

 

[Lucas5477]

I don't see any D's or U's on it.



Since it is a HT3B and not a BHT3B then It must be a Undivided houseing right?



Lucas

 

[BPonci]

Is the 4 bolt flange entry area have a divider in the center?

 

[Lucas5477]

Yes it does. Ok I see now.



I thought when we were talking divided or undivided it had something to do with the center section and how it hooked on to the exhaust said and compressor side.



It must be a 27 divided exhaust housing.



What do you guys think about using this in a twin set up with a USB? Any thoughts.



Lucas

 

[Forrest Nearing]

the D and U are just my way of showing which is which... in other words, there's no such thing as a 22cm divided housing or a 23cm undivided housing...



I wouldn't use it in a twin setup with a USB... just use a 26cm undivided housing... pretty much the same performance, but you don't have the divider hurting flow, and you have a much lighter and more compact housing.



if ya know anyone looking for a 26, I just might know someone who has one laying around



Forrest

 

[Stomp]

Forrest

I am really interested and I sent you a PM.



Stomp