Engine/Transmission (1998.5 - 2002) What tools for band adjustments?

[JohnMcCarthy]

It looks like I need some sort of square socket and hex socket to adjust the bands in the transmission. The Haynes manual I have doesn't say what size these are. Thought I would ask for some advice since I would like to do this soon. Thanks!

 

[LHartman]

If I recall correctly, it doesn't take any special sockets/wrenches, but you will need an Inch-lb torque wrench.

 

[Bob Wagner]

book mark this http://www.dodgeram.org/tech/transmission/automatic/AT_band_adj.htm

 

[OPoole]

Some are torx T40 or 5/16 socket 12 point.

 

[JohnMcCarthy]

Thanks for the info!