What TST program with II SPS 66 Turbo?

[JVolpe]

I am going to switch to a TST PowerMaxCR and EZ stack to see if I can get a little more HP/Torque with the SPS 66 turbo. Is anyone running SPS66 with TST and what program, twins or standard??



The HOT Juice/Attitude and EZ stack dynos at 475rwhp and runs consistently 13. 8s 1/4. I am hoping the TST and EZ will give me a little more bang on low end and 60' times. 1. 96 60' is my best so far, I need better 60'.



Still running up against rev limiter/torque management, doesnt seem to be a solution for that on the 04. 5 600s up.



Mods are in the signature.

 

[jwilliams3]

Read some of my posts.

 

[silverram03]

"Still running up against rev limiter/torque management, doesnt seem to be a solution for that on the 04. 5 600s up. "



BD has a module that will eliminate the torque management and top speed. http://www.bd-power.com/ram/product.php?pn=Ram Speed Eliminator&tt=ram

 

[Tomeygun]

I am going to switch to a TST PowerMaxCR and EZ stack to see if I can get a little more HP/Torque with the SPS 66 turbo. Is anyone running SPS66 with TST and what program, twins or standard??



The HOT Juice/Attitude and EZ stack dynos at 475rwhp and runs consistently 13. 8s 1/4. I am hoping the TST and EZ will give me a little more bang on low end and 60' times. 1. 96 60' is my best so far, I need better 60'.



Still running up against rev limiter/torque management, doesnt seem to be a solution for that on the 04. 5 600s up.



Mods are in the signature.

"old" twins program all the way

 

[JVolpe]

silverram03



They dont list one for a 04. 5 600.



Spoke with Mark at TST today for awhile. He said he has a couple of SPS66s to test with, but wont have any dyno numbers for at least a week. I am leaning toward the twins with the EZ stack. I have a new Triple Dog in the back seat since the first one crapped out the first time I plugged it in. I am not sure what I am going to do with it yet.



tomeygun



If all else fails, I will ask for the old twins program and see what I can do, think the injectors will be first though.