Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
I put 2 sets of Mastercraft Courser A/T on my '01 (235/85/16). I got 50K out of them which is about right for the heavy towing I do. 50K on the rears, the fronts went longer but I don't recall how much. About half my miles were grossing 32K+.
I would have put them on my current truck if they were available at the time.
I put 43K on a set of 315/75/16 Mastercraft Courser C/T's just daily driver, occasional towing, & sled pulling. They still had plenty of "street tread" on them, but I got a offer I couldn't refuse on some new tires.
Mastercraft is a good tire to use for CTD's since they are reasonably priced and wear very well. I had a set of 33x12. 50xR16. 5 Courser A/T's that had maybe 10-15K miles on them when I sold my old truck and they had more than 1/2 tread left.
I'm on my third set right now, maybe 20,000 miles or so. I've gotten 70,000 plus out of the first 2 sets ... ... ... . A/T and C/T ... ..... went with C/T's again this time. I rotate every 15,000 or so when I change my oil.
I have 50k on my 235/80 17's on my 3500 Dually. I use the Matercraft Courser HTR's in the summer and the Courser MSR's in the winter. It looks like I should easily get another 20k before I have to replace them. I rotate them all every 5k as required by the place I bought them from. I would get them again in a heartbeat. Mastercraft are the same tire made by Cooper and usually cost a little less.
I'm on my third set right now, maybe 20,000 miles or so. I've gotten 70,000 plus out of the first 2 sets ... ... ... . A/T and C/T ... ..... went with C/T's again this time. I rotate every 15,000 or so when I change my oil.
so one of the girls i work with told me that her husbands family owned a tire shop ... he recommended mastercraft htr's ... said they would probably be good for 60k ...
they're the smoothest tires i've ever had ... and i've never had 6 before!!!