Engine/Transmission (1998.5 - 2002) Wildcat diesel fuel line upgrade???

[Rattlin_Ram]

Now that I have a new vp-44 (dealer replaced under warr. ) I want to upgrade my fuel lines and banjos, replace my lift pump (don't ask why the dealer didn't replace it too, it passed the "flow" test), and add a Drag Comp. After searching around found a system from wildcat diesel that looks like what I want. BUT I tried to find their website and can't. Well I believe I did but it says it's been shut down to retail sales. The system I'm lookin for is this one: http://www.dieseltruckresource.com/articles/wildcat/wildcatmax.html



Anyone know where I can get it, or if there is maybe a better one?

 

[Bob Wagner]

Now that I have a new vp-44 (dealer replaced under warr. ) I want to upgrade my fuel lines and banjos, replace my lift pump (don't ask why the dealer didn't replace it too, it passed the "flow" test), and add a Drag Comp. After searching around found a system from wildcat diesel that looks like what I want. BUT I tried to find their website and can't. Well I believe I did but it says it's been shut down to retail sales. The system I'm lookin for is this one: http://www.dieseltruckresource.com/articles/wildcat/wildcatmax.html



Anyone know where I can get it, or if there is maybe a better one?

I am working with Olee Poole on a replacement line kit. All the fittings and lines for a very fair price.



bottom of the page



http://www.powerbypoole.com/fuelpumps.html

 

[PC12Driver]

Wildcat is closed, but the fellow who made up the kit for them has his own site and still sells the kit (now called the Scotty Smart Fuel System):

http://www.scottyairsystems.com/



Or you can order the kit here:

http://store.dieseltruckresource.com/fuelsystems.html

 

[scotty1]

You can email me for your choice of 3/8" biodiesel compatible rubber push lock kits or 1/2" biodiesel compatible 1/2" from the lift pump or from the tank.

I also can put together a very high quality 1/2" braided teflon kit from tank to VP-44 or from the hardline at the frame to the VP-44. All my kits are biodiesel compatible and are made with high quality AEROQUIP components. All kits replace the banjo bolts with the biggest inner diameter metric adapters on the market. The metric adapters come with a steel/synthetic rubber o-ring.

Each kit comes complete with a fuel presure kit with needle valve.

-- email address removed --



Also, these kits use -8 or -6 JIC reusable fittings.

 

[pcarlson]

Rattlin Ram,



I have been running the 1/2" braided teflon kit from Wildcat from the frame to the VP. Idle pressure is good 15 psi and only a drop of 1-2 psi cruising at 75 and 12 psi at GCW19100lbs (5er). If Scotty1 made this kit I would say that it is a great upgrade as I have been very pleased with it.