Will it work?

[rlyons]

What would I need to do to make this turbo fit my 92? http://cgi.ebay.com/ebaymotors/HX35...6QQihZ019QQcategoryZ33742QQrdZ1QQcmdZViewItem

Would it be of any benefit?

 

[Philip]

The turbo will fit your housing. To us that 12cm housing you would need to shorten the down pipe I think 1-1/4" due to the extra length the waste gated housing.



The 12 cm housing would spool faster than your 16cm. But most likely you would see high drive pressures and higher EGT temps from the extra restriction.

 

[rlyons]

Can I put my hot side housing on it? never mind I had a brain dump, I see it is different. My EGTs are hot enough now when I tow my trailer so I don't think I would want it any hotter.

 

[Philip]

Your hot side will work on that turbo. All you would do is seperate the HX off the W/G housing then slide it into your housing.

 

[dpuckett]

If you arent going to use the exh housing, why not get a PDR HX35 or an upgrade kit from HTT? It looks shiny and new, but wont get you the performance of the other options, and probably cost more.



Daniel

 

[rlyons]

I think I will look into the upgrade kit but on their web site I can't seem to find the upgrade kit or maybe I am overlooking it.

 

[dpuckett]

Look under compressor housing upgrades under Dodge performance.



DP

 

[rlyons]

Look under compressor housing upgrades under Dodge performance.



DP

Well I feel dumb, I didn't scroll down far enough. :-laf Which stage would be better when towing? I have to be carefull towing now to keep the egt's under control in hot weather. I get a bad surge when getting off the throttle also.

 

[dpuckett]

I say you cant get too much air- go for the 60mm wheel.



DP

 

[CSchafer]

I've heard there is not much of a difference in egt or power between the stage 3 and 4 most people say to just save the money and go with the 3. Call htt and they will help you with what you need.