Competition You guys seen this vid? 10 sec ram

[mattymac]

Here you go, a 10 second ram and an 11 sec dirtymax.





http://video.ls1tech.com/Player.aspx?fileid=A9797340-CBE8-4D39-BF69-658C08AD329F

 

[FordCummins]

Thats movin... ...

 

[HEMI®Dart]

Somebody here should know who's truck that is.

 

[lmills]

those trucks were movin out.

 

[Amish Elegance]

The dootymax I believe was the guys from No Limit Diesel Performance. Not sure on that one. The Ram is Darren Morrison, out of the Garmon stable. Got fuel??



Vid was from the season opener DHRA Pro Street Shootout.

 

[Hohn]

Dang-- that Garmon truck NEVER even cleaned up... Needs more air, prolly.

 

[Scrappy]

He's already got some pretty big twins! I saw that truck dyno 762hp/1200+trq @ Suncoast Transmission in Feb and I think he is even higher now!

 

[banshee]

I think the Maxi belongs to Jess & Buck Spruill from out here in NC. They bring that thing to most of our local get togethers. It's run a little over 700 on the dyno and is consistently in the low 11s now.



John

 

[Justin1889]

My god I now see why some of the fuel mods say for track use only. :--)

 

[Jim Fulmer]

Dang I thought my truck was smoky at WOT... ..... do you guys even run an AFC?



Jim

 

[DavidTD]

Dang I thought my truck was smoky at WOT... ..... do you guys even run an AFC?



Jim

AFC - Anti Fog Control? :-laf

 

[Turbo Thom]

Jim... ... ... ..... You have to run the housing or the oil will spill onto the track, under the tyres, and into the wall. Or at least some type of cover plate. You do believe that, don't you?



. . Preston. .

 

[Jim Fulmer]

Jim... ... ... ..... You have to run the housing or the oil will spill onto the track, under the tyres, and into the wall. Or at least some type of cover plate. You do believe that, don't you?



. . Preston. .

That's good stuff!



Yea, I run one with a tight spring too... ... ... ... ... . are you wet from the storm Hope you'll are safe!



Jim

 

[CRobbins]

That was COOL! Wanted to save that for my collection but it won't let me.

Any one know how to download it to hard drive?



CR

 

[Turbo Thom]

Yeah Jim. We're ok but some folks aren't so lucky. We had one fellow die when a large poplar tree let go and fell through his roof, pin him to his bed. Wife and children were down stairs asleep. We had lots of water but no damage.



And as for as Darrens' truck goes, he ran a 10. 61 at IRP then blew his side cover gasket out. He has put a lot of money and time in that truck and it shows. I think it will go faster yet.



Thanks for asking.



. . Preston. .

 

[Jim Fulmer]

then blew his side cover gasket out



Been there done that, going to Muncie in 03' Fixed it for real and added a 24V breather in front and haven't looked back. Don't know if I ever told you guys that my old motor didn't look that bad when I pulled it, some piston shrinkage(explains the blow-by) but the Cyl walls and bearing looked ok.



Jim

 

[DavidTD]

That was COOL! Wanted to save that for my collection but it won't let me.

Any one know how to download it to hard drive?



CR

You can get if off my site. www.dieselperformancemotorsports.com It's under 2005 event pictures and Video's. File Darrens 10. 77 pass

 

[Todd T]

you can see it here too!



http://www.dieselperformancemotorsports.com/media/10.22.mpg

 

[CRobbins]

Thanks guys, I have been showing them to a friend for "recruiting" purposes to the TDR. He hasn't seen any of the drags yet. This should put him over the edge. His new truck (to him) wouldn't pull his 5'er and I fixed that for him. But I teased him for about 4 weeks 'till HE could AFFORD to get the gauges for me to install.



Have'n fun helping others... .



CR

 

[DavidTD]

then blew his side cover gasket out



Been there done that, going to Muncie in 03' Fixed it for real and added a 24V breather in front and haven't looked back. Don't know if I ever told you guys that my old motor didn't look that bad when I pulled it, some piston shrinkage(explains the blow-by) but the Cyl walls and bearing looked ok.



Jim

Man Jim, "Muncie 03" and I didn't get to meet you? Next time we are at the same gathering come by and shake my hand. It would be great to put a face to a name. :-laf