Engine/Transmission (1998.5 - 2002) What’s my horse power?

[KKunz]

With the mods in my sig any one have any ides what I’m running for horsepower and torque?

 

[Cummins724]

I'd guess around 425hp with the small injectors.

 

[16919]

Get some bigger sticks and then a clutch eventually. I have heard the ofe hold 600 hp though. get some mach 4's 150 hp... ... ... ... ... .....

 

[DCreed]

I'd agree with the #s given, but if you go with the bigger injectors you'll need studs to handle the boost over 45psi. how much boost are you seeing now?

 

[KKunz]

I guess I should update my sig. I have studs and orings and when I did the G-56 conversion I went with the south bend OFE. I have been thinking about some mach 2or 3 but just don’t want to have egt issues when towing the lowest elevation I tow at is about 5,000 feet and have towed up around 10,000 feet so the air is pretty thin where I live.

 

[wildmanben]

My OFE was still holding at 600hp.

 

[PRattenbury]

For $75 you can find out exactly what horsepower you run assuming you get on a decent dyno. Plus, have some fun. Just my $. 02

 

[gathomas]

Whats your HP ? easy, just multiply your Boost number at any given time by eleven (11) 30 lbs boost x 11= 330 HP Where did I get this info ?? Bruce Mallison CEO Diesel Injection of Pittsburgh, Diesel Injection - Where the Strong Ones Come From he has written pages on this subject... go get educated!! Glen

 

[Rattlin_Ram]

Whats your HP ? easy, just multiply your Boost number at any given time by eleven (11) 30 lbs boost x 11= 330 HP Where did I get this info ?? Bruce Mallison CEO Diesel Injection of Pittsburgh, Diesel Injection - Where the Strong Ones Come From he has written pages on this subject... go get educated!! Glen

WOW with JUST a drag comp and stock HY I'm at 440hp!!!!



Somehow I don't think the dyno would show that though... :-laf

 

[16919]

WOW with JUST a drag comp and stock HY I'm at 440hp!!!!

Somehow I don't think the dyno would show that though... :-laf

Your putting 40 psi through an hy? You got some balls or want a new turbo... . :-laf If my math is right... ... ... .

 

[NoSeeUm]

I am guessing in the range 350 - 375.



I would recommend you buy some Mach 4's if you are going to upgrade. My set-up tows with no issues. You might want to do some wastegate work on the HX35 or upgrade to a 14cm.



Jim