I haven't yet got the best grasp of this weight/rolling resistance vs. wind drag thing.
Running arund bareback I can expect 20 and small change for mileage. (All this is running 65-70. )
Add a 2k flatbed on the receiver hitch and that will drop to about 19. Put a 2600# car on that same trailer (total 4600#) and I can still get high 18s.
BUT . . . a 3k box trailer on the receiver hitch will pull me down to 16 right off bat. okay, wind drag. I'll buy that.
BUT . . . tie on a 5k gooseneck flatbed (tandem singles) at a shade over 5k, and I'm down under 17 running in 6th . Put 7k of old tactors on the deck, and I'm quite happy to be in the elevens running in fifth (sixth in that situation runs hotter than I like).
Where I have trouble is figuring how the unloaded gooseneck at 5k does so much poorly than the loaded flatbed. Both have dovetails and just four tires on the ground.
Running arund bareback I can expect 20 and small change for mileage. (All this is running 65-70. )
Add a 2k flatbed on the receiver hitch and that will drop to about 19. Put a 2600# car on that same trailer (total 4600#) and I can still get high 18s.
BUT . . . a 3k box trailer on the receiver hitch will pull me down to 16 right off bat. okay, wind drag. I'll buy that.
BUT . . . tie on a 5k gooseneck flatbed (tandem singles) at a shade over 5k, and I'm down under 17 running in 6th . Put 7k of old tactors on the deck, and I'm quite happy to be in the elevens running in fifth (sixth in that situation runs hotter than I like).
Where I have trouble is figuring how the unloaded gooseneck at 5k does so much poorly than the loaded flatbed. Both have dovetails and just four tires on the ground.