2nd Gen Non-Engine/Transmission How to Make Dana 70U into a 70HD

[EBung]

I know someone explained it in detail but I cant find it.

 

[EBung]

Come on guys help !!!!!!!!!!!!

 

[BILLVO]

This should help. Learn to use it. It has more ifo than you will be able to handle.



https://www.turbodieselregister.com/forums/search.php?s=

 

[SRath]

C'mon, Billvo. You know the search feature is very difficult or impossible to use when you search for anything that has less than 3 characters in any of the search terms. You can't use "70" or even "70U". You can't use "LSD" (limited slip differential, that is. ) That leaves searching for "dana". Way too many hits.



I've tried many times to search for "271" and similar items of interest with the same overwhelming and therefore, unhelpful, results. Maybe someone can share their knowledge of a way around the search parameter restrictions with those of us less clever?

 

[EBung]

This should help. Learn to use it. It has more ifo than you will be able to handle.



https://www.turbodieselregister.com/forums/search.php?s=

It has never had more than I could handle. If you're so sharp you find it and paste it here for me

 

[BILLVO]

It has never had more than I could handle. If you're so sharp you find it and paste it here for me

Here is your answer and to top it off you even posted in this thread and it has the answer you are looking for. By the way I found it on my first try and it was the second one on the search list.



I can get you a few more threads if you like with almost the exact info in them.





https://www.turbodieselregister.com...sions/188070-d70hd-vs-d80-detroit-locker.html

 

[BILLVO]

C'mon, Billvo. You know the search feature is very difficult or impossible to use when you search for anything that has less than 3 characters in any of the search terms. You can't use "70" or even "70U". You can't use "LSD" (limited slip differential, that is. ) That leaves searching for "dana". Way too many hits.



I've tried many times to search for "271" and similar items of interest with the same overwhelming and therefore, unhelpful, results. Maybe someone can share their knowledge of a way around the search parameter restrictions with those of us less clever?

The way I do it is I type in the subject and then go and pick one of the most likely forums it would be in. Then you can even shorten or expand the search by picking the time frame. In this case I just typed in to look in the second gen no engine forum only.

 

[SRath]

The problem I have, Billvo, is that there are many really good posts that never use anything but three-letter abbreviations (KDP, GSK, etc. ). I will certainly get hits typing it out to "Killer Dowel Pin" or "Governor Spring Kit", but I will not get hits on many of those good threads that only use abbreviations we all know.



Wait; it would not accept "Killer Dowel Pin" or "Governor Spring Kit" because of the "Pin" and "Kit". So start over: ""Killer Dowel" and "Governor Spring" is what I would need to search for. It gets complicated and annoying sometimes and is just easier to ask the question (again, no doubt).



I just wish the search feature would allow you to search for anything you need whether it has 4 or more characters or not. Especially such accepted TDR jargon as the aforementioned. (Note that you could not search TDR for "TDR"... )

 

[24Vpirate]

you cant make a 70 u into a hd due to the pinion bearings in a 70 u are the size of a 60 and the carrier brngs are bigger then a 70 u houesing can fit