Install of Bypass. Motor now "howells" under load above 1800rpm

[p-Bar]

Look at your power steering line it has a large weight on it for the same reason. A quick and dirty fix by DC

 

[JasonCzerak]

Hope you fix it, go find an old floor mat or mud flap that has a flat portion and cut out a piece to fit and drill your bolt holes. I'm thinking it will work unless one of your lines are causing the problem. Not to hijack, but what oil pressure guage did you find? I been wanting to add a oil pressure and temp guage but only found the old school black autometers. I would like to match the isspro's I got that match the factory guages. Also did you t off you bp filter line for op guage? Thanks and sorry about all the ?s

I've been a fan of auto meter. I only have one diprocol and that's for the rail.



I run the phantom II gauges. . Based on the info I got from amsoil I'm not going to worrie about it.



When I get my edge box sold I'll be getting a new a-pillar mount and I'll pick up a 4 pod over head and run oil pressure and something else.



I did not port the input lines for the gauge yet naturally.





steved, I could swap input and output lines as they are different in length or make new line.

 

[JasonCzerak]

Look at your power steering line it has a large weight on it for the same reason. A quick and dirty fix by DC

I've had that in the back of my head as well. . I'll you with it this weekend.

 

[CSnyder]

Hope you fix it, go find an old floor mat or mud flap that has a flat portion and cut out a piece to fit and drill your bolt holes. I'm thinking it will work unless one of your lines are causing the problem. Not to hijack, but what oil pressure guage did you find? I been wanting to add a oil pressure and temp guage but only found the old school black autometers. I would like to match the isspro's I got that match the factory guages. Also did you t off you bp filter line for op guage? Thanks and sorry about all the ?s

I just got an order from Genos today and in their newest catalog they have these guages now.

 

[JasonCzerak]

Solution to this problem

Hose damper and rubber piece. To dampen the by-pass filter's virbrations. - TDR Roundtable



This is what fixed things.