Fass problem

[LowFly]

Thanks, I'll have to climb under the truck and get the serial number.



I have the HPFP so I guess that is why it isn't bypassing.



I might have to make a manual bypass for any similar situations in the future.

Just get 2, 3/8 NPT "T's" and put one on the inlet and one on the outlet. Then on the stem portion of the "T's", install a ball valve or equivalent and just connect the 2 valves. If put shuts off for any reason, open the valves up.

 

[CIverson]

Just get 2, 3/8 NPT "T's" and put one on the inlet and one on the outlet. Then on the stem portion of the "T's", install a ball valve or equivalent and just connect the 2 valves. If put shuts off for any reason, open the valves up.

That is exactly what I was thinking of doing. I thought I read in the instructions, that the ports on the aluminum block were 1/2"?

 

[LowFly]

WEll if you want to match our ports... . they are 1/2" NPT... but you will not restrict any with 3/8" NPT..... (Which is actually 1/2")... . which ever way you see fit... .

 

[CIverson]

This reply is for diesel-dan, as I can't call right now and he's not accepting PM's.



I have recieved my upgraded motor I purchased, but it did not come with the new bracket. I cannot use the old one as there are no studs on the end. The dealer I went through is telling me he called, and that they want me to pay for the bracket.



In the thread posted about the upgrade campaign it states it comes with a new mounting bracket, I already paid more than the prices posted in there, I assumed they went up as everything does, but to pay more and not get a bracket is very, very frustrating.



Hopefully you will see this message and reply, or will be open when I get done with work.

 

[LowFly]

This reply is for diesel-dan, as I can't call right now and he's not accepting PM's.



I have recieved my upgraded motor I purchased, but it did not come with the new bracket. I cannot use the old one as there are no studs on the end. The dealer I went through is telling me he called, and that they want me to pay for the bracket.



In the thread posted about the upgrade campaign it states it comes with a new mounting bracket, I already paid more than the prices posted in there, I assumed they went up as everything does, but to pay more and not get a bracket is very, very frustrating.



Hopefully you will see this message and reply, or will be open when I get done with work.

What dealer is this..... i have not talked to anyone about this yet..... it should have came with brackets if it was a HPFP update.....



Your cost should have been 195. 00 + 50. 00 and Whatever shipping they might charge as well.....



Let me know..... You got an RMA number?

 

[CIverson]

Diesel-Dan to the Rescue! :-laf



Looks like everything is getting resolved, Kudos to Dan for being so helpful with this ordeal.