Night smoke

[DCadigan]

Does anyone else running a smarty get a thick haze when taking off from a stop. Driving in the daytime all I can see is a little black smoke. Could it be a bad injector?

 

[Motorhead]

Normal.....

 

[WMoroni]

Mine smokes 100% of the time with the smarty. Light load, heavy load, hammer down or just easing along, doesnt matter, just affects the amount of smoke. At 65mph, no load, its a light haze. Starting from a dead stop you can black out the intersection if you want to.

 

[Bob Wagner]

are you guys running the 411 software? Thanks

 

[Forrest Nearing]

Bob, check your email @msn.com

 

[Regcabguy]

Bob sent me a fairly clean update,but before the smoke was intense.

 

[Forrest Nearing]

also, to stay on topic, the 411 software is awesome... very little smoke from start to finish

 

[JCasper]

Bob sent me a fairly clean update,but before the smoke was intense.

What SW is this?

 

[MrFixit]

With my Smarty Junior YES!... . when towing my trailer on 40hp mode.



Bob W. , You said Marco may make an update for the junior that is a little less agressive. Is this still the case?



Thanks

 

[DCadigan]

are you guys running the 411 software? Thanks[/QUOT

I have the latest software download. Mild TQ #3

 

[Forrest Nearing]

realize that a stock truck will look like a smoke factory at night in the rear view even when during the day you can't really see anything

 

[Regcabguy]

Smarty program.

What SW is this?

Here goes: smt4v410cd210b47. 7z. I hope that's right. My neighbor still has to help me with these updates. I'm assuming the 411's are cleaner. This program minimized rattle and tamed the smoke down. I can still smoke up the atmosphere if I lug or stomp on it.

 

[Forrest Nearing]

yes, the 411's prompted the advertisment for 100hp with lower than stock EGT's



they're nice!

 

[JCasper]

Here goes: smt4v410cd210b47. 7z. I hope that's right. My neighbor still has to help me with these updates. I'm assuming the 411's are cleaner. This program minimized rattle and tamed the smoke down. I can still smoke up the atmosphere if I lug or stomp on it.

Looking through all my Smarty downloads it doesn't look like I have that one.



How long have you had it, how is the touchy pedal, would it be good for towing?

 

[Forrest Nearing]

the "box stock" 4. 11 program isn't touchy at all. very drivable!!! I have a clutch and injectors, and I downloaded the 4. 11 wild torque managment programs, and it was WAY too touchy, so I re-downloaded the "as shipped" programs, and it's all gravy again

 

[JCasper]

the "box stock" 4. 11 program isn't touchy at all. very drivable!!! I have a clutch and injectors, and I downloaded the 4. 11 wild torque managment programs, and it was WAY too touchy, so I re-downloaded the "as shipped" programs, and it's all gravy again

So where do you get this SW?



When was it released?

 

[Forrest Nearing]

off the Madselectronics site, it's the most recent set of downloads

 

[JCasper]

off the Madselectronics site, it's the most recent set of downloads

The latest SW was released on 12-13-07. But I don't see a 4. 11xxxxxxxxxx



I am running this one, level 5 Smt3V312DD211D

 

[JCasper]

You guys all have an S06 Smarty?

 

[Regcabguy]

Looking through all my Smarty downloads it doesn't look like I have that one.



How long have you had it, how is the touchy pedal, would it be good for towing?

I've had it in there for several months now. Not touchy at all. I carry a 2000# camper all the time so I guess you could say I'm towing somewhat. You can call Bob for advice. I've never seen this program published.