Show me your exhaust tips!

[NPloysa]

I am stuck between a 5" turn down or a black chrome slash-cut. I had slashed stainless on my previous two Dodges so looking to change it up.



Post your pics along with what brand and where you got it, if you don't mind!



Thanks

 

[silverram03]

I think some aussie stacks would look sweet Nick. On my truck I have a 5"x24" 15* rolled edge magnaflow tip. It keeps the soot off my truck.

 

[1smoknC]

Pics are in my sig, but I would go for a black chrome. I think they look sick. Im getting some 6'' black chrome mitre cut stacks on my truck here in a little bit. :-laf

 

[NPloysa]

I think some aussie stacks would look sweet Nick. On my truck I have a 5"x24" 15* rolled edge magnaflow tip. It keeps the soot off my truck.

Greg, not going down the stacks route (yet?) but it is a future possibility!



I would like to get a simple clamp-on, but am afraid I may have to cut the stock tip back to get the length correct, especially on a longer tip, 12" or longer, meaning no going back to a totally stock truck.



Also, a 90 degree turnout may look funny since the stock tailpipe exits at a 30 degree angle off the truck and not perpendicular like on older ones. So, with the 90 degree straight down, it will be ok, but at an angle, the exit will be pointing toward the hitch.



And yes, the black chrome tips do look pretty!

 

[13MWZ]

black chrome looks sweet when it's new. but after it gets warm a few times it turns kinda goldish. Ugly and tacky if you ask me. .

 

[NPloysa]

black chrome looks sweet when it's new. but after it gets warm a few times it turns kinda goldish. Ugly and tacky if you ask me. .

Hmmm, thanks for that tip, pardon the pun. :-laf I will keep that in mind.