Ford turbo down-pipe on an '03 Dodge?

[mconstable]

Need advice ASAP... I ordered an exhaust-brake, specified 4" exhaust, forgetting my '03 goes from 3. 5 to 4"in the downpipe, so I'm stuck and noone in town can find just a 4" section with a flange to cut mine off and re-weld.

If I remember correctly, the '03 Ford downpipe fit with minimal hassle and is all 4".

Any advice is GREATLY appreciated.

Thanks!

 

[mberry]

Post this in the 911 section also. Sorry I can't help you.

 

[AH64ID]

I would think you could find one on here from guys that have 04. 5-07 5. 9 and have gone to 5" or aftermarket 4"...

 

[JCasper]

I have one of these if this is what you are looking for.

 

[XtremeDiesel]

what brake did you order? an inline?



if so why not just get a 3. 5-4" adapter.

 

[JJPage]

I have one of these if this is what you are looking for.

The brake takes the place of the cast elbow, he needs a new 4" downpipe.



Call Bryan at Diesel Power Products, have him overnight you a 4" downpipe.

866-379-8685

 

[MMeier]

I have one of these if this is what you are looking for.

A post turbo EGT probe... ... ...

 

[mconstable]

Thanks Xtreme and JJ... I got it covered for now, had to forget about the e-brake until I get settled.

 

[JCasper]

A post turbo EGT probe... ... ...

Yup, it was there for a short while.



When I first got the truck people had me all concerned about chips in the turbo so I put it there.



Then at a Bomb party one night after a few beers I drilled the manifold:-laf

 

[WoodChuck]

You can get the MY 04. 5, 4" downpipe from Dodge (#52121600AA) and you'll need a new clamp (#52121285AA)