New Super Silent Fass Pumps!!!!!!!!!!

[LowFly]

thanks for the fast reply i will be sending it in unless there is a shop in the Ogden utah area that that is approved to do the update

I ask if it has the seal that it gets sent directly to us under the RMA: 2007-10,000 BUT if you dont have a seal, i do have a few dealers in Ogden.

 

[1965LONEWOLF]

I Agree With Diesel Dan , I Told Him The Problem , He Got Right Back To Me And I Let It Go For Two Weeks And It Runs Fine , So Give It Some Time , Diesel Dan Is A Man Of His Word -

 

[Moose]

Is this program still running?. . I just found this thread in a search and would like to find out if my FASS 150 SN# 5190 is covered under it... If the program has ended can we still buy the update kits?



TIA



Moose

 

[LowFly]

Is this program still running?. . I just found this thread in a search and would like to find out if my FASS 150 SN# 5190 is covered under it... If the program has ended can we still buy the update kits?



TIA



Moose

Yes its still going... . just did one yesterday as a matter of fact..... Your SN is old enough to just get the WP-Kit sent to you for the $15. 00. You shold not have a wire seal on your pump.

 

[Yo Hoot]

Dan,



I'm having an issue with a vendor not cooperating with me with regards to FASS warranty. Is there a way to contact you or to straighten this out?



Thanks,





Mike

 

[LowFly]

Dan,



I'm having an issue with a vendor not cooperating with me with regards to FASS warranty. Is there a way to contact you or to straighten this out?



Thanks,





Mike

PM me the Details... ... i added you to my buddy list. I will call your dealer.

 

[Yo Hoot]

PM sent. Thanks Dan

 

[RiverRatt]

Bought the HPFP 150 back a couple years ago and just now getting round to putting it on. Seen this thread and decided to get it updated before I put it on. Serial number is 1253. Bought it from TST Products. Do I send it back to them or order the update kit and put it in myself or send it back to you or what ?

 

[LowFly]

Bought the HPFP 150 back a couple years ago and just now getting round to putting it on. Seen this thread and decided to get it updated before I put it on. Serial number is 1253. Bought it from TST Products. Do I send it back to them or order the update kit and put it in myself or send it back to you or what ?

All the answers to your questions are covered here:



https://www.turbodieselregister.com/forums/1665570-post14.html

 

[RiverRatt]

Thanks for the reply. Got in touch with TST today and they give me the ok from you guys to send it back. Just wanted to make sure before sending it out.

 

[LowFly]

Thanks for the reply. Got in touch with TST today and they give me the ok from you guys to send it back. Just wanted to make sure before sending it out.

OK... i talked to them yesterday about you then... . cool... ill keep an eye our for it.....

 

[RiverRatt]

Sent the pump out Wed afternoon. Got it back today (Tues). Wow . Thanks Diesel-Dan. Got no excuses now. Got to put it on tomorrow. Put fuel pressure guage on this past weekend using the banjo bolt on bottom of the fuel filter. With Tst on 5/3 pressure drops to 1-2 psi. Hope this is why I seem to lost power and fuel economy. I'll see if I get it back after I put the pump on. THANKS for the quick turn around.

 

[BK]

Sent the pump out Wed afternoon. Got it back today (Tues). Wow . Thanks Diesel-Dan. Got no excuses now. Got to put it on tomorrow. Put fuel pressure guage on this past weekend using the banjo bolt on bottom of the fuel filter. With Tst on 5/3 pressure drops to 1-2 psi. Hope this is why I seem to lost power and fuel economy. I'll see if I get it back after I put the pump on. THANKS for the quick turn around.

I lost fuel economy with the new fuel that's on the market.



So unless you can buy some "low" vs "ultra low" , I'll bet you'll still experience the loss of fuel economy after the pump replacement - sorry to say.



I also had a pump on the way out, but replacing it didn't change my experienced loss of efficiency with the ultra low crap oil. I can't get anything but that around here.



I heard in other areas, the "low" is still available.



-Bob

 

[LowFly]

Sent the pump out Wed afternoon. Got it back today (Tues). Wow . Thanks Diesel-Dan. Got no excuses now. Got to put it on tomorrow. Put fuel pressure guage on this past weekend using the banjo bolt on bottom of the fuel filter. With Tst on 5/3 pressure drops to 1-2 psi. Hope this is why I seem to lost power and fuel economy. I'll see if I get it back after I put the pump on. THANKS for the quick turn around.

No prob..... glad we could help! Let me know how it works out... .

 

[BHaner]

Strange... I had this mod done back in July... It made the pump louder!



Have there been any new updates since then?

 

[ScottWA]

this post stil active? Are they still doing the uprade?

 

[Yo Hoot]

I have the newer model and it's not that quiet.

 

[RonA]

The only time a FASS pump is quiet, is when it's turned off. This is my 3rd one and they have all sounded like they are mixing cement.

 

[ScottWA]

well mine is loud!!! Its always been loud and A couple buddies of mine have the filtered wersion and cant even hear the pumps at all. Quiet as can be. Not much louder than a stock lp

 

[SShafranko]

The only time a FASS pump is quiet, is when it's turned off. This is my 3rd one and they have all sounded like they are mixing cement.

Hahahhaha That is freakin funny. Mixing cement. I have had many aftermarket external pumps including race cars and none of them have been quiet. Even Holley, Aeromotive, Walbro their all loud to some degree but they do the job. If noise is a factor then build a box around it and install a couple of heat extracting 12v fans and the noise will be a thing of the past.