2nd Gen Non-Engine/Transmission Ignition Switch Problems/Replacement?

[Mbschmidt]

Went to start papaw this morning and the key rotated all the way to the start position without engaging the starter. I found that if i push the key in real hard and turn it that it will start, but I'm sure this won't last.

Anyone had this problem? I think I will have to replace the ignition switch, but don't know exactly how to go about doing it.

I have a Haynes manual for the truck, but it gives no help at all. The local Advance auto has one in stock for $73, anyone had any experience/problems with them?

 

[Mishkaya]

Have not yet had to replace the ignition switch on the truck yet, but I have had to do so on several cars, and did not find it difficult to do. Good luck.

 

[LandShark]

Check to see if your truck was part of the ignition switch recall.

 

[Mbschmidt]

Check to see if your truck was part of the ignition switch recall.

is there an easy way to do that?

 

[Mishkaya]

is there an easy way to do that?

Here's some info on the recall:

Recall #875 Ignition Switch Wiring

 

[LandShark]

Any dealer can do the recall check for you. It's a good idea to do since there are quite a few. While you are at the dealer, also ask for a 'build sheet'. This is a printout of all the major components used to build your truck and is handy when ordering parts in the future.