2nd Gen Non-Engine/Transmission what is the u joint #

[kcv67]

What u joint do I need. The one closest to the rear axle. 5 speed dana 80



Thank you



Casey

 

[mwilson]

What u joint do I need. The one closest to the rear axle. 5 speed dana 80



Thank you



Casey

Spicer 5-160X is what I come up with. Diameter of the bearing cap is 1. 188" if you want to check before taking it apart.



Mike.

 

[NIsaacs]

Most non-spicer brands, as in aftermarket, the number is 330.

Nick

 

[mwilson]

Most non-spicer brands, as in aftermarket, the number is 330.



Nick

Ok, should have provided aftermarket as well.



As Nick says a 330 is aftermarket.



To be specific...



NAPA NPJP330

CARQUEST 2-0054



Mike.

 

[kcv67]

Thank you to the store I go.

Any ideas for a u joint press?

 

[BSeyler]

I always just use a vise.

 

[mwilson]

I always just use a vise.

Same here.



Vise, big MF hammer and good aim.



If you are not comfortable using the hammer method you can use a hollow spacer (or socket) and a deep nut and make the vise the press.



Like this...

Mike.