Frame mount step bars or boards

[NSperduto]

Anybody know of a company that makes step bars or running type boards for 04 QC. That mount to something other than the rocker panel. I currently have a set of boss bars but their mounting brackets as well as my rockers panels have disentegrated to the point where I can't keep the bar on the truck any longer. I have a plan in the works to replace my rockers and other rotted metal, but until then I'm looking for a bar that mounts different. being 5'3 and getting in this 4x4 is a real pita without a step. I'm thinking I'm going to be on my own trying to fabricate something.

 

[lpennock]

Amp power steps mount to frame and inside of body. Don't know if that would help but you could grab install manual and check.

My 5500 had a set of steps that mount to the cab bolts but I don't know who made them.

 

[NSperduto]

The amp wont work for me as the back side of that rocker or maybe it's a body panel is rotted on my truck so i can't attach to it

 

[Bob4x4]

Amp power steps mount to frame and inside of body. Don't know if that would help but you could grab install manual and check.

My 5500 had a set of steps that mount to the cab bolts but I don't know who made them.

The amps do not attatch to the frame

 

[Bob4x4]

White knuckle offroad makes some sliders that clamp on to the frame only.Very stout. http://white-knuckleoffroad.com/powerwagon.htm

 

[lpennock]

The amps do not attatch to the frame

You're correct. When I put them on my 5500 I had to use a different hole in the body to mount the front arm because the transmission cross member is so huge. That's what had me thinking they went to the frame. Old Timers kicking in I guess.

 

[Bob4x4]

You're correct. When I put them on my 5500 I had to use a different hole in the body to mount the front arm because the transmission cross member is so huge. That's what had me thinking they went to the frame. Old Timers kicking in I guess.

LOL it happens..........