2nd Gen Non-Engine/Transmission Old style tow mirrors

[SAndreasen]

Where can I get parts for the old style tow mirrors? And where could I get a set of style tow mirrors?

 

[Bob4x4]

witch parts do you need?

 

[SAndreasen]

I need a mirror for the right side it's cracked

 

[Monstermaker]

Depends how close to Seattle you are. I just took a nice set off my truck so I could install 3rd-gen flip-out power and heated mirrors.
Which is what you should do! I hated washing around all those brackets.

 

[Bill Lins]

I need a mirror for the right side it's cracked

Go to a glass shop- it's no big deal to have the broken glass replaced. It's easier for them if you still have the broken glass for them to use as a pattern to cut the new one by.

 

[SAndreasen]

Depends how close to Seattle you are. I just took a nice set off my truck so I could install 3rd-gen flip-out power and heated mirrors.
Which is what you should do! I hated washing around all those brackets.

I have the new style on my 98 I absolutely hate the pos they shake so bad you can't see anything out of them not to mention when you shut the doors they shake and rattle like the door is going to fall off if my bed wasn't so wide I'd put Mickey Mouse ears back onjust spent 400$ dollars on some hoping they would be better but they ain't . The mounts on the mirrors on the 94 seem to be smaller than any of the other ones I've seen on dodges

 

[Monstermaker]

Are you sure they're tightened up enough? Mine don't do that.
You have to really crank 'em down.

 

[SAndreasen]

I had the body shop out them on I'm going to take the door panels off and see if they will tighten if not they are going in the dumpster

 

[Road Dog]

There's supposed to be a metal plate on the inside to stiffen the door. I found this pictures to give you an idea.




#ad



It often gets lost during repairs.

 

[SAndreasen]

Thanks yes I have the metal plate

 

[SAndreasen]

Well it' is possible that the body shop guys huffed to many paint fumes the day they installed the mirrors and forgot the backing plates