Injector Tubes...

[Walsh]

Hey folks, last time i changed my oil it was over full by 1/2 in. Thought maybe i had over filled it this last time. So before heading south for winter changed oil, air, and fuel filter as well as did 75000 service of emission components. Now down here in florida i have had p0191 pop up twice (fuel rail pressure sensor circuit performance) . I checked my oil and its about an inch over full... crap! No issues with motor... runs fine. Im thinking leaking injector tubes... normally i do all my own service work but down here i do not have very little for tools. Sooo what you think may be issue and can anybody recommend a dealer in the cape coral/ fort myer area. By the way appx 75000 miles, thanks for any imput!

 

[p-Bar]

That suck. Never heard of injector tubes leaking if they have never been messed with. Sounds more like an injector issue. Any Dodge dealer should be able to diagnose the problem.

 

[lpennock]

Did a diesel shop or Cummins dealer. Time for injectors and don't use remanufactured.

 

[Ozymandias]

According to some threads in the past, diesel in the Oil is almost ever the cp3 leaking because the injectors and connecting tubes are in the returnflow diesel alley. No contact to the oil circuit.

 

[TCDiesel]

According to some threads in the past, diesel in the Oil is almost ever the cp3 leaking because the injectors and connecting tubes are in the returnflow diesel alley. No contact to the oil circuit.

Correct.. its Not the tubes.. and don't condemn the injectors just yet..

Walsh call Me on this..... 763-228-7121. it just to lengthy to type, and to time consuming on My end You can call this morning I will be hard to reach 12pm-3PM CTS.