Timken bearing part number

[RPosey]

A little help please. Any one out know the
Timken part number for gen 3, year 03, 4 wheel drive front wheel bearing without hub?

 

[GCroyle]

Try http://www.showmetheparts.com/timkenmobile/

 

[seafish]

This??

https://www.rockauto.com/en/moreinfo.php?pk=1117854&cc=1413470&jsn=925

 

[Ozymandias]

A little help please. Any one out know the
Timken part number for gen 3, year 03, 4 wheel drive front wheel bearing without hub?

There is no bearing without hub because it's a unibearing.

 

[RPosey]

This??

https://www.rockauto.com/en/moreinfo.php?pk=1117854&cc=1413470&jsn=925

No, that includes the hub. I only want the bearing. I plan to press the bearing out and reinstall the new bearing/

There is no bearing without hub because it's a unibearing.

 

[RPosey]

No, that includes the hub. I only want the bearing. I plan to press the bearing out and reinstall the new bearing/

Could you explain a unibearing. i have seen post in the past where bearing was replaced

 

[RPosey]

Try http://www.showmetheparts.com/timkenmobile/

Thanks I have that part number. I want to replace bearing only. Press out and press in. Lots more economical

 

[BigPapa]

If you’re trying to save money, you won’t save much, IF you can find it. I priced some yesterday for a fellow at work. He had a Tundra. The bearing was $160 and the hub was $190. $30 wouldn’t cover my time to press it out and a new one in, not to mention the probability of tearing the bearing up. They’re basically two roller bearings with one outer race. The center race is split and VERY easy to mess up.

 

[RPosey]

If you’re trying to save money, you won’t save much, IF you can find it. I priced some yesterday for a fellow at work. He had a Tundra. The bearing was $160 and the hub was $190. $30 wouldn’t cover my time to press it out and a new one in, not to mention the probability of tearing the bearing up. They’re basically two roller bearings with one outer race. The center race is split and VERY easy to mess up.

I agree with that. I assumed the bearing only would be closer to
$30

 

[RPosey]

If you’re trying to save money, you won’t save much, IF you can find it. I priced some yesterday for a fellow at work. He had a Tundra. The bearing was $160 and the hub was $190. $30 wouldn’t cover my time to press it out and a new one in, not to mention the probability of tearing the bearing up. They’re basically two roller bearings with one outer race. The center race is split and VERY easy to mess up.

Pushed the wrong button
Tried to pay with card , they said just wait till you get invoice. I almost flipped out when he said that. Who sends a part then ask for money later. 610-593-2753

 

[BigPapa]

Pushed the wrong button
Tried to pay with card , they said just wait till you get invoice. I almost flipped out when he said that. Who sends a part then ask for money later. 610-593-2753

???

 

[GCroyle]

Did you find the hearing only that you were looking for?

 

[RPosey]

???

The rest of the story. I found a place in Penn that sell bearings really reasonable for the best to satisfactory quality. Example needed bearing , no hub for hay roller. International farm supply about $400, $90 from tributor if you knew someone. Pennsylvania co. $22, I thought wow. Did not want money till parts arrived with invoice. Who does that 610-593-2753

Did you find the hearing only that you were looking for?

Did not find part #

Did you find the hearing only that you were looking for?

Did not find part #, still looking. I have seen a post that say they installed bearing only, two comments, one said took more than 20 ton press, other one said he did it with 15 ton press. Maybe you can help.