3rd gen Wanted parts ( been searching for ages )

[Gen3Moe]

Hey everyone, hope you all are doing well. I am looking for parts that have been discontinued for awhile now for my 05 3rd gen.
They are:
1) KMC XD222 Enduro Beadlock wheels ( 8x6.5 - 17 inch ).
2) Weld commando pro beadlock wheels ( 8x6.5 - 17 inch).
3) DRC (Desert Racing Concepts) front skid plate bumper/light mount.
4) KORE billet upper shock mount.
5) KORE billet control arms.
6) 8” SOLTEK LA PAZ baja designs HID lights ( set of 4 or 6 )

 

[AEdelheit]

Advice from someone who has been around the off road scene for a while

Dont spend money on Kore parts, they are very nice but shock towers are too short to get the most travel out of the front and you cant get bushings the arms anymore, I know many people who had to get real creative or scrap their Kore parts. Also if you are serious about off road performance just go with long arms, they perform so much better then short arms.

Good luck on the wheels though unless you run glass -17 offset is not great on these trucks and you will the rear of the front fender real bad with 37's or larger. Patton Fab can make a great bumper for you if you cant find the DRC one.

Dodge Trucks Xtreme would be a better fourm / FB page to look for these parts.

 

[Gen3Moe]

Advice from someone who has been around the off road scene for a while

Dont spend money on Kore parts, they are very nice but shock towers are too short to get the most travel out of the front and you cant get bushings the arms anymore, I know many people who had to get real creative or scrap their Kore parts. Also if you are serious about off road performance just go with long arms, they perform so much better then short arms.

Good luck on the wheels though unless you run glass -17 offset is not great on these trucks and you will the rear of the front fender real bad with 37's or larger. Patton Fab can make a great bumper for you if you cant find the DRC one.

Dodge Trucks Xtreme would be a better fourm / FB page to look for these parts.

Really appreciate your response and all the information. If thats the case with KORE than I’ll stick with Thuren and patton fab. I am considering short arms in the meantime, long arms are in my future plans. I’ll keep looking for the wheels tho as I already ordered glass fenders. Thanks again

 

[Regcabguy]

Advice from someone who has been around the off road scene for a while

Dont spend money on Kore parts, they are very nice but shock towers are too short to get the most travel out of the front and you cant get bushings the arms anymore, I know many people who had to get real creative or scrap their Kore parts. Also if you are serious about off road performance just go with long arms, they perform so much better then short arms.

Good luck on the wheels though unless you run glass -17 offset is not great on these trucks and you will the rear of the front fender real bad with 37's or larger. Patton Fab can make a great bumper for you if you cant find the DRC one.

Dodge Trucks Xtreme would be a better fourm / FB page to look for these parts.

The voice of reason once again.