Recent Content by 1968 RT

It was the turbo shaft Well put in the MBRP exhaust, cat delete pipe, removed silencer ring... . allwas good in the world. Thought I would try stacking the quad with BD X-box. No codes, stupid amount of power, gobs and gobs of smoke. And EGT's were thru the roof, I could peg the pyro at about...

Thanks for the replies so far, very helpful. I took a close look at the turbo when I installed the AFE and TT last weekend. It is clean and shiny, spins easy, no side to side, or fore and aft play at all. I was going to pull out the silencer ring, and give it a new home in the garage, but it is...

I really have not noticed a decrease in boost, but I am not sure what max boost was since I didnt really get a good chance to play with it before the noise popped up. I do have the all metal intercooler. My EGT's have always been actually on the low side compared to others posting. I can hit...

Well I have searched just about every inch of the archive and found nothing relevant. so here goes my own thread. I have a 04. 5 with the 48re in a 2500 QC SB 4x4 3. 73 (now that the particulars are outta the way) So far I have the Quad box standard 100 version and thats it. About a week...

A pillar mount I have three gauges in the A-pillar. My wife who drives the truck too is 5'4" and has no problem just grabbing the wheel. It does take a bit of time to get used to the bigger blind spot, but it looks really good, you can see every gauge and the road easily. In retrospect, I maybe...

Thanks Bpenrod, I was wanting to hear if the stack was code free and smooth. I had my truck at a dyno day a couple weeks back, it posted 354 HP and 770 TQ with just a Xzillaraider 100. I have no other mods except for gauges and floor mats. However I am going to add an AFE PG7 and TT...

Actually I have been researching a quad/VA 3. 2 stack and it looks good. Would I need more fuel pumping capability though? seems like it could suck the rail dry PDQ. 04. 5 with an auto.

Kubota does make a great tractor/diesel. I would def. spend some time dealer shopping because some are good, and some are not. I have a New Holland tc40DA and really looked hard at the 'Bota's but my local dealer did not have a real good rep. . If you really want to go overboard, check out...

I bought my Isso's from a small diesel shop in St Louis. The owner gave me a 1/4 female to 1/8 male adaptor (dont quote me on the exact size, it worked) Told me which port to use, screw the adaptor into the test port, then the sender into that (keeps it from bottoming out) He also told me...

I got a copy today at Barnes and Noble, they were just putting them on the shelves. BTW Hey to everybody, new guy currently in Wisconsin

I will take the chase system