Recent Content by AHuggard

I have seen comment in the post about the intercoller on the 93's at least being at very marginal capasity. What effect would increasing the IC size have. Would in improve economy and torque or just one of these. The search didn't bring up any thing usable.

got answer from ad in mag

Thanks Gary, I thought it would be and I will replace the filer on the pump first.

I have about 40 gallons of year old diesel fuel that has been stored in a pickup bed steel fuel tank. I use a water removing fuel filter on the pump and have anti-gel conditioned the fuel when I filled the tank. Can I safely mix this fuel with current purchases say 5 gal per 30 gal fill to use...

T-Bone, The prodigy is a great control as the other psot indicated. I use one on a dump-bed trailer which I often haul 5. 5 tons of rock. I would recomend that you use #10 wire where ever you can and enven replace the wiiring in the trailer to the brakes. For very short runs 12 is ok but 10 just...

Well that is really true but few limit it. It is a state law here in kansas, rarely enforced. Also, my Dodge 3/4 ton operators manual specifically says the max CGVW is actually 12k and as you point out 6k for the truck and 6k for the trailer. The shop manual for my truck only allows something...

Folk, Let's face it, almost if not all of us pull overloaded. The rules are the trailer and load can't exceed the towing vehicals wieght. That means that a 3/4 ton shouldn't put more that about 6k. Now that said I often pull 17k or a CGVW of 23200 with an old Ford heavy 3/4 460cid I have because...

Thanks Dan,I am going to check the local salvage yard today then maybe some others but they are some distance away. I have seen other post about the newer style hanger so at my age I better try to find the newer one that sounds a lot easier to use. Al

Thanks James. Got a PM from a guy that has the tubing. I'll look for the other stuff a the local salvge

I need the line that runs from the transmission to the liquid-to liquid cooler. Ill take them both if necessary. The one with the sensor tap on it is the one most needed. . Also a battery deck and a spare tire assembly. My spare tire assembly is just gone. Not even bolts hanging down. I need the...

Thanks Ciberusiam, saved me from making another mistake.

Can anyone tell me which line out of the transmission is the input to the cooler? I have a 93 D250 Ram CTD with standard 4 speed/over-dirve and factory installed 2nd cooler under the bed. Sorry guys, I haven't got the shop manual yet. A picture would be great. I want to put the trans temp gage...

You might try an old style hydraulic actuated control if you are really worried. I am not a ham but I have used the hydraulic type on a stock 23ft stock trailer and they work well. I have both. I had to put the Podigy controler in another truck cause you can't by the older style any more. Don't...

from Orgional poster Guys, As a less then 1 week member of TDR I am amazed at the weath of knowledge and the willingness to share it. I can see that what ever I might do will be costly and it seems to me from the info you all have provided that I just better just watch my loads nor buy a bigger...

Folks. All the oils mentioned in the post are good, but if you want the best in my opinion use MObil 1 the 100% synthetic. If you have any doubt, take metal cop and freeze your oild and the Mobil 1. See which one flows after an over night stay in your old frig. Then take the cups with what is...