Recent Content by bwtufts

Does anyone have the installation instructions for the OEM keyless entry kits?? I bought one from the dealership a few years ago and the only instructions that came in the box, were how to program the control module... I tried taking it to a few dealerships in the past and they look at me like...

Thanks alot!! Found one for $75. Picked it up today!!

HELP!! I've got an 01. 5 2500 4x4 that I had a 'little' accident in (as strong as these trucks are, they can't push bridges out of the way!!) and I've been searching hi and low for replacement front axle parts to get her back on the road. More specifically, I'm in search of the steering knuckle...

Mine was doing the same thing on a recent drive home, but my check engine light came up and i got an error code. After doing the little turn the ignition on and off three times the truck fixed the problem it self but turned the check engine light on. Hooked up the scanner and it went off. Don't...

By-pass line?? Is everyone running a by-pass line around the pusher pump in case it goes out??? Thought it was a little much when all you have to do is watch the fuel psi gague. Also, whats the best gague??? I was figuring between the filter and injector pump. Brad USMC

Ive decided on some Mach 3 injectors and heard a lot about the need of putting a secondary lift pump and larger diameter fuel lines in line between the fuel tank and stock lift pump to keep a better supply of fuel going. After priceing these throught dieseldynamics.com ($200 for the secondary...

Im running the Banks "Big Head" waste gate. When towing something heavy with my foot on the floor and a decent grade or in heavy exceleration I'll be running around 48psi boost max. During normal driving conditions with no trailer its usually around 36 to 38 psi max.

yea, ive got a set of gagues. Im kinda worried about the EGT because now when im pulling a gooseneck with a small dozer at 75 mph or so on a decent grade im running around 1250 (sensor on the mainafold) which is pretty close to redline on the temp. Will the injectors make that worse or better...

I've got a 01 2500 4x4 6spd with a banks ottomind controller, banks intake, banks turbo,4" straight through exhaust, and high flow air filter. I want more power and was wanting a few suggestions. I use the truck for towing every now and then, but when when I do its usually very heavy loads...