Recent Content by C.MILLER

wiredawg, Sounds like a pretty custom mounting job ya did there :D. How do you like your TST? Anyways, I was thinking of trying to make a mounting plate where the ashtray goes, and mounting the remote there. Unless there's some sort of mount to put it up on the a-pillar. Thats where I had my...

Just received my new TST box w/ remote. The remote has read-outs for egt's, oil, and boost. For those of you with this set-up how/where have you mounted your remote?? Any ideas appreciated. TIA Chris

Thanks for the info so far. I was told to go with the mach 2's as the 3's would approach the limits of the B1B Quickspool turbo. It does sound reasonable to let the bigger injectors do most of the work though. But the person I'm buying the injectors from definitely recommends the 2's over the...

What are your opinions on this combination. TST PM3, EDM Mach 2 injectors, and a B1B Quickspool turbo. I mostly drive in the city and often haul a 4000lb camper. Although this combo wouldn't put me there, I would love to have a 450-500 HP truck that was still reliable/driveable. TIA, Chris

Justin, Brian - Thanks for all the great info!! Cummins2fast, aren't you glad you didn't listen to my first post?! I had no idea I could be risking that much with my setup. I don't know all the technical stuff about deisels, I just try to read, learn, and use common since on stuff. If I don't...

Justin, After all is said and done, which box would you recommend? Right now I'm considering either a TST or a Blue Box ( after I get rid of my current Ottomind/ EZ combo. ) Or shoulda guy just go with bigger injector/turbo combo for more power, and stay away from boxes? TIA.

Brian, Thanks for all the info. I'll take the EZ off for now, so I can still have the use of the Banks gauges that are controlled through the Ottomind. Hate to have to spend more $$ on another box, but the Ottomind just doesn't do it for me.

Brian, Does the combo of the Ottomind and the EZ a recipe for disaster on all the cummins engines or only the HO. I have been running this set up for at least a year now, and have ran it pretty hard at times with no known problems. Of course the last thing I want to do is destroy the very...

cummin2pass, The EZ is for both the timing and fuel, and there are 3 settings that are adjustable inside the box.

The company that I bought the EZ from said that it was possible to stack the EZ with the Ottomind, so thats exactly what I did. Works great for me!! Hope this helps.

Jeff, I sealed my Depot headlite with some clear- auto/marine silicone. There's a small gap running completely around the entire headlite (where the black casing meets the clear) that i filled with this stuff. That cured my condensing/fogging problem with the headlites. Hope that helps. Chris

Steve, My fuel pressure is 13-14psi @ the injection pump while idling. I relocated the original lift pump near the fuel tank about a year ago. Before relocating the lift pump I had about 12psi under the same circumstances. This hesitation doesn't set off any codes either. I just put Optimas...

I have the exact same problem you speak of. I have tried cleaning just about every electrical connection under the hood and putting them back together using dielectric grease, recalibrated TPS, done the TSB, checked fuel pressure, changed fuel filter. It doesn't happen as often now, but when it...

I don't have an exhaust brake. If the waste gate stuck open, would this have caused the problem? I don't know how to check if this was the problem, as the truck is running great again. I was @ a steady 3/4 throttle between 35-40 lbs boost when it just all the sudden lost power. Felt like I...

PO743, PO753, P1765. All were said to be normal with this trany upgrade.