Recent Content by Carolina Cummins1

What is the factory block height? Is it 4. 5" or 4" blocks? Should I use a 2. 5" block for replacement? This mod would help significantly. I also like the level appearance. I'm also buying the PullRite auto adjusting hitch for cheap insurance.

Thanks for the reply, but that wouldn't be an option since I have torsion bar axles. I would probaly have to add a spacer or subframe above the axle mounts. I'm hoping this is the last resort.

I bought a 1991 fifth wheel Avion 35' in great shape. A friend hauled it home for me, because I haven't bought a hitch yet. Started measuring the top of my truck bed and the bottom of the camper where it sticks out of the truck and I only have 2" clearance. I thought about: -Lowering the...

I know what you mean. Do you think a weak pump could cause the box to loosen?

This is my second PSC box in two months. The first had slop the first week and had no return to center. They sent me another replacement, this one reurns to center but also has slop in two days. Does this boxes have a break in period? When the slop returns it doesn't steer any better than my...

I bought a 1991 Avion 5ver today and I haven't bought a hitch yet. I didn't realize the short pin box and the trouble I might have with my short bed. I know I can buy a glider hitch to help solve the problem, but will it be enough? Who has pulled the older Avions with a short bed? What hitch...

I was reading and noticed the same problem with my 01. The driver side will shutter when the brakes are applied and now my axle seal is leaking. My shutter started when I had both a front brake job. Both rotors turned (glazed not warped) and new brake pads installed. It feels like the wheel...

I know exactly what your talking about!!! I just fixed mine yesterday. A couple of weeks ago I had new front brakes put on my truck and the rotors turned. The weren't warped, just glazed a little. My brakes has always been very smooth. Until... Imediately, I felt the brakes pulse and the...

I've ran it for years in all kinds of diesel motors, especially cummins. Run it!!!!

Sorry for the slow response. Thank you Thomas!!!! No wonder I couldn't find any parts, I was using the wrong name to identifiy it. I'll call the dodge parts counter tomorrow. Thanks!!!!!

Yes!!! I need #12, it mixes or seperates the hot and cool air. The picture looks a little different but same concept. 01 blend doors are turned by a electric motor on the bottom. Where could I get one?

Come on guys, share some info. I tried rockauto and some other parts stores but no luck.

I need a part number, website, or information for a 01 new or used HVAC blend door. I broke the bottom plastic shaft off mine. Any help would be appreciated, Thanks

I read a post about increasing the caster on the bottom adjustment. I did it myself and adjusted it so it pushed the axle towards the front. It stopped the wandering by 80%!!! That simple adjustment gave me the biggest return. I hope this helps

DIY!! Make it yourself!!! I did. Install a pneumatic pressure regulator between the head and map sensor. First, bench set the regulator to 15lbs and then go to the hardware for some hydraulic fittings and air hose. Easy!!!! $20-$30 bucks