Recent Content by Cissco

Air vents in back of cab? Had mice get in there at a goat show in my 14. It is behind the insulation board behind the back seat. Good luck

Usually don't post much on here anymore but I thought this tread was kind of interesting. First joined in 2000 with old 91 put the jancy racing exhaust a 16 cm turbo housing and turn the fuel up. My old truck with 430,000 miles on it needed some new sticks so a few weeks ago I put in some 5x12...

I appreciate all the replies. Yeah I understand I have one horse trailer that has torsion axles and if it's unloaded hauling it you hit the brakes sometimes the front tires will slide because the tires are barely touching the ground. Then again I've been dealing with this for 7 years with my 14...

My mother has a 2019 2500 with air ride and it's pretty cool. I didn't know how the aftermarket air suspensions compared to the factory as far as a ride but I really like the idea of the more adjustability of the aftermarket. I already have a wireless controller with compressor running airbags...

My truck is a 2020 ram 2500 there's no difference I think in the height of it and what my 14 was. Also I guess it's the new multirate springs but the 2020 rides a lot bouncier than the 14 ever was.

Does anyone have experience with Kelderman's rear air for ram 2500? Ride vs factory coils. I hate how tall the rear of the truck is.

I have done this on 2 trucks.When you cut the metal bar off you need to leave 5/16 to 3/8 of an inch of the plastic and then bevel the corners. Then everything about the rear seat functions exactly like the factory except at about maybe 65 degrees it will fold down.

On my Kenwood Alli had to do was ground the Park wire to the case to get functions while driving. I know on the pioneers they sell a bypasses you have to wire in. I would recommend a maestro interface.

Crutchfield sales and adapter to hook up your factory camera to your new radio.Cutting wires on these new vehicles can cause problems. I had a Kenwood in my 14 tradesman that had three camera inputs and Android audio it was awesome. Good luck.

I am not sure but I think I got it fixed.The old sensor was covered in a thick layer of some kind of lime buildup. Cleaned it all off and reinstalled and it seems to be working fine.Hope it's not just dum luck that'll break soon. Thank you for the replyand yes that is the correct part.

Does anyone know where to get a temperature sending unit for a 91 1/2?stupid me ordered one from Geno's garage for a '89 through '91 not realizing it doesn't fit my '91 and a half. Well it fits but the gauge instantly pegs the hot with a cold engine. The one they list for the 92 and up has a...

Ok I will check wiring. I am guessing it's only the sender and gauge. I have a service manual for a 93 do you think the wiring would be the same on a 91.5? Hope I can look at it before the new year. Thank you for the reply's.

I really think it is a electric problem. I don't know how the sender works. I have been driving first generations since 1998 and have never seen this. The gauge will drop from 3/8 to 0 instantly. If you are going 75 and let off it will instantly raise 1/4 mark over want it was. thank you for the...

What would cause the temperature gauge to drop when you accelerate? I don't mean slowly but as soon as you give it gas it drops and as soon as you let off it raises back up. I did change the gauge from a spare cluster I have and it does the same thing. Thank you and any help would be appreciated.

Replaced front springs with moog 7226 and put on kyb gas adjust shocks about 2 year's ago. The problem is it riders so bad its not funny. Is there a shock out there that would help? Or are the springs the problem? Truck never road good but it was a lot better before. Thanks any help would be...