Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Recent Content by Cochran
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
I want a torque converter control to be able to lock in second and bam through the shifts, I want it to stay locked when I mash the throttle and the truck shifts from 4th to 3rd and then back to 4th. I dont have a jake and I dont need any more engine braking that the stock tow hual button gives...
will idling without a lift pump for 10 minute intervals damage the cp3? I have a remote start that does not power the fass. I could find something with power to trigger a relay if absolutly necessary. but the fass pump fires up as soon as I turn the key.
It would feel like my truck missed right before it set the 0016. I have a switch instlled between the viper box and the tap into the position crank sensor. I close the circut before starting turbo cool down and then I can start the truck again with the remote. I open the circut before I back out...
I just put an hpfp on the truck and when I start it with the remote the pump does not run. As soon as i turn the key to the run position and press on the brake I can hear the pump start. Does anyone have a fix for this
its the viper remote start, it also taps the position crank sensor and creates a conflict. I put a switch that disconnects the remote start for driving. i think its the blue wire it, taps into a plug on the bottom left side of the motor.
just got the truck back today after two and a half weeks in the shop. seems to be working I had to pay a couple hundred for the tow and new fluid. copilot is not working a new one is on the way. the transmission had less than 10000 miles and needed a new valve body but they swapped the converter...
dunno about egts, as soon as I turned the edge up the stock cooler blew the end off. I do know that this cooler will hold as much boost as I want to put through the head.
I blew up my stock one and was forced to replace it. I am very happy with the banks kit. I have a tough time getting the egts above 1300 towing the boat up the hill from lake mead to boulder city. Juice on 3 going 60 mph (in a 45, I could go faster) ambient temps at 115 deg. water temp gets...
I made it to the lake. a friend who has a ford towed the boat. I also go boating at lake mead and live in henderson. I am pretty good with a traler but anything over a few miles an hour and it gets a little squirly. the transmission does have a warranty I will call in the morning and we will see...