Recent Content by ddavis1

Ditto the above on the swingout adapters for your jacks. But I found on my dually the clearance was only about an inch on each side so I added a 3" piece of flat metal to both sides between the swing hinge and the jack that gives a much better clearance. Still folds back out of the way fine.

Problem resolved!! Was bad crimp on terminal in factory harness plug under dash. Worked ok for years but I guess I disturbed connection by twisting, pulling, or pushing when I installed new controller and tied up new cabling. Thanks again to everyone for your assistance.

Thanks for the responses. When I installed the Prodigy I checked the signals (with a meter) at the trailer plugs (have 2, one on bumper and one in the bed) and all were ok. Also had proper symbols on controller display as called out in installation instructions. When several days later I went to...

Have been monitoring TDR forums for months just learning from others. Now have problem of my own. After seeing many positive comments on Prodigy controller I upgraded from Tekonsha Voyager XP. Installation on my '98 3500 was easy via factory harness, setup no problem. Truck sat for a week before...