Recent Content by djcturner

Yes I will be doing just that today. I just got off the phone with a rep from Geno's garage and hes telling me that the problem very well could be the sending unit its self. He suggested I pick up a needle gauge from the hardware store and try that to measure the PSI. I installed one on a 1975...

I found this site. http://www.bluechipdiesel.com/lift_pump_diagnostics.html Great information there, very nice.

The LP is a Raptor FRRP 100. No the filter is not new, its black, might need to be changed. I was going to change it too. You say filter(s), there is more than 1 fuel filter? I had it changed on the last oil change. Now that the PSI has been set to 17 at idle and even though it drops to 0 on a...

I dont know what you mean by asking me what I am running? I'm in the forum under dodge cummins 5.9 engine. I have a 2002 3500 SLT duelly. I installed a airdog FP 2 years ago. I used a GAS pressure gauge to set the pressure on the FP but I guess it was a very inaccurate Gas gauge. It has been...

Thanks for the reply I just installed a glowstick gauge and found I wasn't running good pressure. In fact it wasn't even moving the needle. I set the PSI at 16 idle. Sitting in the truck at idle it now runs at 16psi and when I gun the peddle it drops to around 10psi. Then I took it out...

Hello, I have a 2002 3500 Ram. Before I state my problem allow me to mention I changed the lift pump 2 years ago. The PSI is set correctly. I just notice I had 2004 as the year, this was incorrect, sorry. The truck is doing this. If I floor it at take off the truck gets up to around 40 MPH...

Actually I just got off the phone with a diesel mechanic and he told me to buy a flex magnet and work it all around. Take off the bottom radiator hose and check for the pieces in there. He said the pieces would have dropped straight down and not moved much because the water flow would not have...

I am hoping to get good news to make me feel better after my findings. I own a 2002 Dodge ram 3500 quad cab, automatic trans. I had a little over heating the other day on my 24 valve 5. 9 cummins. When I got home after driving it about 2 miles. It never reached the red mark but it did get...