Recent Content by DKupec

How about the front sway bar from a Power Wagon?

Thanks guys. I'll check out DDP since they're close to me.

Mine wont always connect to my phone either. Usually if I try to make a call from the phone the U-Connect will show up or if I press the U-Connect buttom on the mirror. I don't use my phone in the truck very often so I really don't know how often this actually occurs.

Does anyone know of a good place in the Seattle area to do a dyno run? I would lilke to get a baseline for my truck before I start doing any mods. Thanks for the help! Duane

Some of the guys that tow 5th wheels or goosenecks take the rear spacers out to lower the rear of the truck a few inches. This helps give a little more clearance over the bed rail on the 4x4 trucks.

tw... where is AutoTrim in Tukwila? I've been thinking about getting the Stoneguard installed to help with the chips, unfortunately I've already got some but I figure that I could help minimize getting any more. I work in Tukwila so it would be a quick trip and lunch to check them out.

When I bought my truck from DS the salesman told me that they order a lot of their truck without the factory tow packages because lot of guys want a gooseneck hitch or a class V hitch. They will install whatever hitch the buyer wants. This way the buyer is not paying for the factor hitch just...

U-bolts The PacBrake bags I got for my 08 have two U-clamps on each side that hold the bottom plate to the axle tube. It's the same for all of their 3rd Gen kits from what I have seen.

You may not let the granddaughters in the truck unattended when it is running or with the key in the ignition but the interlock broken neither of those matter. They would still be able to take the truck out of park and if the truck in on an incline and the parking brake not set, you could have a...

Scott... Yeah, it sits in a fenced lot on the corner of East Marginal and the Boeing Access Road/International Blvd/Pacific Highway (whatever you want to call it)

With all that chrome and that wing I'll bet this thing could beat anything. NOT!!! If I had gotten a Matchbox truck like this when I was 5 I probably would have though it was cool but this has got to be the most ghetto Dodge I have ever seen. Why would you do that to a truck???

Can't wait to see how it turns out. I want to add self leveling control to my 3500 and have been looking around for some ideas.

I don't think that it is the drilling of the frame rails that is the real issue with the Dodge frame. These are fully boxed frames and what they don't want you doing is drilling through and running a bolt through and tightening down a bolt on the opposite sides of the frame collapsing it. This...

I put mine in front of the wheel well. I haul a lot of stuff in the bed and wanted to plug up higher so that it didn't get broken and full of dirt. I put it up about as high as I could without hitting the bedside.

Hellwig makes a rear sway bar for the 3rd gens. Summit Racing sells them. I have the PacBrake Air Springs and I like them so far.