Recent Content by Doc12

When looking for a new 3500 I was told that you could not install the bed camera, it must come from the factory. I have no problem using it to hook up my 5er. It should be part of the 5er prep package!

Update Start up Saturday still had the problem. Monday calling STAR for further help.

Thanks for all of your responses. Dealer found that #5 injector was not tight and threw a code. Checked the other 5 and they were also not tight to specs but to a lesser degree. Will check Saturday on a cold start to see if all is well.

I have a new 2018 with 500 miles on it that I picked up last week, 4/30/18. I noticed a slight hiccup while driving then things started getting worse. It was at the Line-X dealer and in side over night Tuesday, when they started it up in the morning it filled the building with smoke and had no...

I have a 14 3500 MegaCab, and getting ready to install the auxiliary tank and thinking of putting a T where the rubber hose attaches to the 3/4" overfill return line. By doing this I will not have to cut into the main fuel fill tube. If the rollover valves are at the fuel tank I will not have...

Thanks, that is exactly what I was looking for! Doc

Where did you cut along the fill pipe? Doc

How about some pix of the install of the T connector into the main fuel line.

Stab, I was able to get a look at the fill tube on my 14 3500 SRW today. The fill and vent tubes are metal all the way down to near the tank. Does not look like I can get the T installed after the metal fill tube and I do not want to cut it. Thanks for your help. Doc

Ken Is your vent tube rubber or metal? My fill tube and vent tube are metal all the way to the tank on my 14 3500 SRW! Doc

Stab, With the T covered by another hose did not make the install clear. Did they cut into the fill hose or attach it to the end of the tube and not cut the hose etc. I guess my big question is, can I install the T without having to cut the main fill hose so I can remove the T and reattach...

Install T connector in main fuel fill line I am about to install an auxiliary fuel tank in my 14 MegaCab. Can anyone provide a photo of the T connector installed. I am interested in the location you put the T along the fuel fill line to the main tank. How much space is there to work with...

What I was interested in and wanted to see was the location where you put the T in the fill tube. There is too much snow here to crawl under the truck to explore where to install, and we are to get up to 8 inches more tonight. How do you tow that Open Range without a slider? Keep an eye on that...

As long as you stop in time. The 6 gal. was about all you could put in the tank and be OK. Doc

Stab, When you have time could you post a pix of how you tied into the fill hose for the main tank. Thanks Doc