Recent Content by farmerbrown

I recently purchased a 3 inch leveling kit. I haven't installed it yet due to questions Will my axle shift with factory track bar? Do I need an adjustable track bar? Is there any other parts of the steering I need to worry about? Am I missing anything else? Thanks for your help and best regards

How do I test the rprv?

Supposed to be all new s&s torque master injectors from engineered diesel. It's a 06 qcsb 4x4 auto 166xxxmi There is no surge at idle which was a symptom of fca on my duramax

I will get rail pressure readings tomorrow. No codes areally thrown. Idle is better now and running better. The injector tick at initial startup is gone. What all is returning fuel to the tank? Injectors, rail and cp3?

So I installed new s&s torque master injectors this past friday. All has been great since the install. Exhaust smell has drastically been cut back and power is better. This morning I went to fire up the truck engine cranked with no start. Started on second attempt. This was an issue that I...

Would original lines and tubes loosen over time? I have no clue if injectors are original or not

This is around most of my feed lines

06 qcsb 4x4 Current codes p0483 Truck has strong fuel smell from exhaust. No smoke at idle. Occasionally will white smoke at wot or will not smoke at all. I know i need injectors. Truck has a slight chop at idle. Maybe slight miss. I did notice residue on my rocker box around my...

well i performed the injector kill test last night. all cyl dropped evenly. but i took some pics from the solus unit

who sells the bms 50 marines?

thanks for the heads up. i would like to stay as close to stock on the injectors. i dont want to drive a smoke machine. my 14 year old 6cta's dont even smoke on original injectors

has anyone used recons direct from cummins?

awesome. who would a good company to go through? on another note, what temp does your engines usually run? mine was running 185, but since my p0483 code have noticed temps hanging out at 195

so would those be considered 50hp?

is there any way to swap to a mechanical wastegate? pros cons?