Recent Content by KeithSmith

Yup, that's the right part number. Got them in today and they work great. Thanks guys.

I looked at a picture of an '03 and they look they same. I will go to the dealer tomorrow with that number. Thanks for the reply, Keith

Over the course of the last few months the 3 light bulbs behind my HVAC controls have all burnt out (2007 3500 Mega Cab). I pulled off the panel and it turns out that they are tiny little bulbs with a plastic base that clips into a printed circuit board. The Dodge dealer in town told me they...

Update: Alright, I've got it working great now. Everything is hooked up per the instructions. All I had to do was add a wire, fuse, and switch so that the system will work properly without setting codes. The fused wire runs from the trans pump output on the timer (not normally used on my...

I just talked to a BD tech guy. He said that with these trucks there is no way to get around these codes. He kept pointing out that they were soft codes and the check engine light will eventually turn off. Soft codes or not, I don't want to look at a check engine light. If a company releases a...

The BD tech guy told me on the phone that the only wire they power is the ECM keep alive. Obviously, this will keep the truck running but the other modules will still set codes. He did not have an answer for me. I am going to call on Monday and see if I can talk to an engineer. I would hope that...

I posted this in the BD Forum on their website and didn't get any answers. I recently installed the 1081160 Cool Down Timer on my 2007 5. 9 Automatic. I installed everything exactly as the instructions said (thermocouple is post-turbo) and the timer works great. The problem is that when...

Yeah, the BD tech said I could tap off of my pre-turbo probe also but I would rather not. I would like to more accurately mesure how hot the turbo is before shutting down rather than just how hot the EGTs are. Anyone installed the probe post turbo? thanks Keith

Just got my BD Timer (1081160) and had a couple of questions about the install. Truck is a 2007 5. 9 3500 Mega Cab Dually. First, I have a Isspro Pyrometer with the probe mounted pre-turbo but I want the probe for the timer post turbo. Where have you guys put this. Is it best to tap the cast...