Recent Content by kslayton

Call Guptons If you haven't already been to Gupton's in Springfield you should give them a call. They are a volume dealer and have the best prices in middle TN by far. I went to almost every dealer in TN. and Southern KY when I bought my 2000 and they were the cheapest by far. The # is...

I just installed a dual gauge A pillar mount about 2 weeks ago in my truck. I bought the paint from the dealer. It sounds like you have the Agate interior so the part number will be PN 82201399 code LAN Agate interior. It comes in a 5 oz. spray can. I think it was around $8 or so. I cleaned it...

After my 4th tank of fuel since installing DD2's my truck is averaging 1. 8 MPG more than before. So by my calculations ( I'm not very good at math) they should pay for themselves in the first 77K miles if fuel prices stay the same :D Now I can prove to my wife that my BOMBing addiction pays...

Rob, Luckily there was still enough bolt sticking out to grab with a pair of pliers. since it wasn't very tight it came out easy. Kevin

I finally got everything I needed to install my FP gauge and was torquing the tapped banjo to 18 ft lbs and it snapped. I talked to Robin at Genos and she said she would ship me another one this evening. Anyone that is about to install one of Ray's tapped banjo BE CAREFUL! The bolts are top...

Thanks guys, At least I know mine isn't the only one . Does anyone have the problem of acceleration not being smooth in 5th gear WOT? It was very smooth for the first couple of days but now it's sort of jerky( for lack of a better word). Kevin

After installing my DD2's a few weeks ago my truck has been fluctuating +/- 50 RPM's at idle. The tach used to be rock steady at idle but now it can't sit still. The truck seems to idle smooth and sounds fine so I am wondering if this is normal with larger injectors or if maybe I messed up...

Charles, I used the factory clamp on mine. I haven't seen any reason to put a different style clamp on. Kevin

Ted, The probe is pre turbo. When the truck was stock I could barely see 1000 degrees pulling a 16K flatbed . That is why I wonder if I would benefit from a bigger exhaust because my egt's seem under control. How do I adjust the wastgate? Right now I am using the elbow that came with the...

What's March 10th?

Smoking the clutch! azcummins, So far the clutch is holding fine, but I haven't gotten brave enough to horse stomp it in low RPM's yet. I've already talked to a few fellow members about putting in a South Bend for me when the time comes, which I don't think will be a very long time...

4 exhaust ? Ted, So far I haven't seen any EGT's over 1050 at WOT. Besides cooler EGT's(which don't seem to be a problem, yet) what increase in performance would I see by going to a 4" exh. ? Faster turbo spoolup ? Higher boost pressure? ( I'm getting max 36psi now) More horsepower...

Re: kslayton TNT, I ran the EZ for about two months with the BHAF. I was happy with that set up but I just couldn't resist the pull of the darkside;) . I would say that judging by my SOP gauge that the DD2's added as much (if not more) increase over the EZ as the EZ did over stock. ( If...

My injectors got here yesterday at about 11o'clock. I was here at the store alone so I was having to answer the phone and help customers and still got them installed by 2 o'clock:) . I want to thank everyone for the input on this site. I would never have attempted it myself if it wasn't for the...

Try National Tire and Wheel I have bought several sets of wheels and tires from NTW. They normally will match anyones prices and the service is great. National tire and wheel Kevin PS. I'm not affiliated with them at all, just a satisfied customer. :)