Recent Content by MBrantley

Check the preload on the rear hub bearings while you are at it, I have owned and worked on many trucks that had loose rear hub bearings ( they are a wear item) it is just one of those things poeple never check... To check them properly you have to remove tire, the drum or caliper (which...

The only thing that does not turn in the tcase if you have locking hubs unlocked is the front output shaft, everything else is always turning (there will be no lube problems). Matt

This is typical with Dana axles. To set it up right you need to make a set of "setup bearings" by grinding the I. D. so it sildes on/off the carrier so you can set up the correct backlash. Do a search for Yukon gear install this will have all the info you need. Matt