Recent Content by moreepms

for future reference that small a load should have set directly over the dual tandems

OK DOOKEY NO MORE PP IN YOU COKEY FOLLOW UP CODES P0123 AN P1694 NEW TPS INSTALLED YESTERDAY INSTALLED, SET TO VOLTAGE AND FOLLOWED all instruction to the letter. SILL NO WAIT TO START AND NO START BUT YES STILLL HAVE CRANKY REMOVE ECM what a pain READY TO SHIP TO...

Thank you. Great write up.

I have a nephew heavy industries electrical guy. He also thought ground. He had me ohm ECM to frame. It is grounded to my frame. He also mentioned how ECM have a protection mode when they loose ground they can go into a hibernation mode to protect the ECM values. He also mentioned...

THANK YOU

WHY I DONT TAKE MY VEHICLES TO SHOPS COMPLETE CRUISE CONTROL MODULE GONE, STOLEN: NO WONDER CRUISE DONT WORK.. BUT I KNOW THE SHOP OWNER

HOW DO I EDIT MY PROFILE

Geno Manual is FIRST ON MY LIST for next pay day. Which is on the 3rd of each month due to SSID 65 y o an on SSI HOWEVER I DID ORDER THE DVD FOR 9.99 on eBay just today You are sharp cookie Thank you so much for all your help.

DURING ALL OF THIS GREAT COMMUNICATION i discovered a GREAT REASON MY CRUISE CONTROL DOES NOT WORK..3 YEARS AGO I HAD NY VP 44 AND ECM REPLACE IN A SHOP My cruise has not worked since, i just discovered the pull cabel is not connected 1. i cannot even find THE CABLE nor the CONTROL MODULE 2...

Concerning back tracking the only thing I did not do is underneathbottom bolt of ECM is a high wiring harness is one bolt that secured wiring harness to block. I removed that one bolt to allow easier access to bottom ECM bolt. So when wait to star failed I decided to not in stall bolt until I...

This article sent by timid33 about mopar man has a wealth of information. THANK YOU FOR YOUR RESEARCH Some where I saw a you tube about setting correct voltage on APPS aka TPS I am confused about where to put the positive or red prong to get voltage reading. Can anyone please clarify this...

I TOTALLY AGREE LEAVING BATTERY CONNECTED WAS A BAD IDEAL. I have back tracked entire process 4 times. Found nothing. There was no ground wire on ECM HOWEVER I RAN A GROUND DIRECTLY FRIM BATTERY TO ECM NOTHING. STILL NO WAIT TO START During process never got near pcm. But did remove ECM.

Agreed truck cranks but no start. No wait to start light. I have a dodge manual. Today I by passed ECM hot wired Vp 44, hot wired secondary fuel pump primed it up an it started right up. Salvage yard VP 44 plug, put hot wire in no 1 pin ground in no 2 pin connect to Vp 44 hear a small click...

NOPE, READ MOST RECENT POST