Recent Content by MRyan

U-joints were in a Precision box. I had them check the rest of the 464's at the warehouse and all were the same (wrong). I think the bearing cups installed on the crosses are wrong.

SKF hubs from Napa 245. 00 each. Moog ball joints from Carquest new updated steering gear from Wermopar.com 365. 00

Caps on, measuring outside of snap ring groove... like you would install them. Many people have had this problem with these Precision 464's... I just found out too late! I had my guy at Napa call Precesion and ask about the correct demensions and he (Precesion dude) even said something isn't...

In the middle of doing hubs, ball joints, u-joints and stearing linkage on my 06 Mega. All gave up at 61K. Order Precision 464 u-joints for front axles(yes steering axles) and no fit... about . 100" to big. My yokes ar not bent and measure 2. 918+/-. PCN 464's are supposed to measure 2. 918" but...

Part No: E7153 Description Value Gallons Per Hour 70-80 PSI Shut Off 15-18 Type Rollervane Volts 12 close window

I would be very careful what you install. I bought an 06 mega that had a 5" magnaflow with their 5"cat. The drone was unbearable!! I put a 5" flex in first... not much help. Pulled the cat and put in a 5" resonator. . a bit better. Pulled the magna muffler and put on a big Donaldon 5"er. Nice...

I tried the resonator..... no help. Got a 5" Donaldson x 51" muffler to try next :) . I'll keep you posted

I have a 06 Mega with a 5" turbo back magnaflow system. We installed a magnaflow cat and also put a 5" flex from EPI at the end of the down pipe. Resonation @ 1900-2300 is unbearable :( . I have a 5" donaldson resonator to try but not sure if that will help any or if I should nix that and just...