Recent Content by MSaine

I use a Snow Performance Meth kit mixing at 80%alcohol, 20%distilled water. Works very well. I've also tried adding 8oz Nitro to 2qt of meth/water mix. Haven't tried on the track yet, but on the street it'll break the rear loose (really loose!) when the boost hits 22 and the meth/nitro mix...

Oops! Sorry, this thread was for HO pumps, which I obviously don't have! My apologies!

458HP, 1087TQ, 95 W/160hp pump, 370's, #4 cam plate, single turbo, no drugs. up 28hp &113tq w/methanol.

TERRIBLE night at Irwindale last night. Best run was 8. 58 @84 2. 26 60ft. Was experiencing real bad tire spin, even easing out and hammering it further down the track. One pass I peddled the throttle halfway down the track before tires hooked up. Tried using the Meth on two of the passes...

Hi all, I'll be heading back to Irwindale Speedway this Thursday, 10-21-04. Anybody else going to be there? I'll be in the white 2500 club cab.

Plan on going back to Irwindale a week from this comming Thursday. Look forward to seeing you there. Any other SoCal guys around? I had planned to make up a signiture for myself, but after looking at some of your rides on the gallery about all I could come up with is something like, "1995...

I re-dyno'd today (after fixing a lame fuel bypass valve) and the numbers were quite a bit better. 458hp, 1087ft/lb. I replaced the bypass valve about a year ago, but never checked the new one for proper spring length. Lesson learned!

Automatic transmissions use a torque converter between the flywheel and trans input shaft, no mystery here. The torque converter itself converts the motion from the flywheel to the trans input shaft. A very simple analogy is to take two electric box fans and place them an inch or two apart and...

Nice short time. What tires were you using?

How bout some info on a B1? New or used. I do intend to eventually go to twins, but finances don't allow that for now, so I might upgrade to a B1. I'd want something capable of 55psi, and good for street use. I running an o-ringed head with stock gasket and bolts, so I probably should...

Thanks for the support. It doesn't run bad for a work truck! Future plans are for twins, pump (still using the 160hp pump), 4000 gov springs, and maybe couple of other things. Eventually I want to push this barge into the 11's in the 1/4. Anybody got a B-1 turbo for sale?????????????????

No meth. Hoping for 8. 20's with it. Wanted to get a pass or two in first. Hey Blue. Beautiful truck by the way.

Hi all. I'm a newbie here. First time post. Don't spend much time on the computer but thought this site was pretty good. I took my truck to Irwindale Speedway last Thursday (9-30-04). Irwindale is an 1/8mi track in SoCal. Thought I'd post my results to see how they rate with you guys...