Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Recent Content by nmsuaggie1
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
Truck is fixed!! I believe that the combination flasher (resistor canistor) was bad. I reaplaced the unit from NAPA with one from Dodge since I could not put the cover on the fuse box and several folks mentioned that this is the only unit that would work after reading a few other similar posts...
Just changed the CTM (Central Timer Module) on my '02 because of the same problem. Drove for two weeks like that until the part got in. Kept the tank full and GPS for the speedo... . Fixed it right up. Dealer charged about $450 for diagnose and repair. I think you could save by doing it yourself...
Forgot to mention that the dealer just replaced the CTM (Central Timer Module). The service manual does not say if there is any of the brake or turn signal data passes through the CTM or on the CCD data bus. . Could this be the short that is causing my blown fuses and no lights?
I am having the same issue as well. Fuse # 4 & 5 keep blowing in the PDC. The combination flasher (resistor canistor) seems to be working fine, actually replaced with a new unit from NAPA. Replaced both fuses and the turn signals, brake lights, and hazards worked fine for a while, then nothing...