Recent Content by pjorlando

Funny, the adjuster jamb nuts did loosen up at about 10,000 miles. After resetting everything, they loosened back up a few thousand more. I attributed it to the high quality roadways here. I got some high strength Loc-Tite and put it on the threads and retightened every thing back up. The...

I got an appointment for my local dealer, through RAM. The rep told me, that the dealership would get the parts needed, and do the repair. Well, I get the appointment, 2 months later. Go to dealer, service adviser, tells me " we will inspect and weld jamb nut" "that's the repair" I...

BTW, truck in picture is long gone, don't know why it still shows up, fixed it

Called Ram Customer Care, in regards to back order of part CSZHV061AA. I explained I do not want any welding done while part was on truck, and as this is not an acceptable repair. Was told local dealer will be able to get when part is released in June. They also let me know the dealer will...

I do understand it should not have been connected, however when I adjusted the bar, centering the wheel it stopped. I can't explain it. Logically there isn't any reason it would have caused it. Anyway, fixing the one cured the other.

Had trouble with this loosening up with about 12K on truck. Steering wheel would be offset and truck would pull to the right. After my personal inspection, I found these nuts loose. Drove in a flat large parking lot and adjust nut back to center. Pull was gone. I use locktite on the threads...

This happened to me a few times. Even after services. I finally re-aligned the steering wheel myself, use lock tight on the jamb nuts and it has lasted over 15,000 miles no issues.

I got the information on how the dealer can program the lights to come on during the day. They are the yellow indicator lights in the assembly. So they shine bright yellow. I think I found the code sheet here some years ago. I have a '14.

Bilstein shocks, I run 19.5s, on my 3500DRW, and having driven trucks my whole life, I see a difference. I do keep the rears at 55-60psi when empty, seems to help.

Got my pump done last week. Drove home, 10 miles, next morning low coolant light on. It burped, and was low. Got some more coolant from dealer and added about 1/2 gallon. My receipt shows they put in 2 gallons, so I guess it really needed 2.5 All good now, interesting the coolant is a pretty...

Local stealership replaced pump this morning.

When I need to flash, I get over zealous and use one of my light bars, usually the 20 inch Rigid in my bumper. I use the high beams mostly on open roadways, and they work great for me. In retrospect, I should have waited for LEDs, they've come a long way. I have found, in my truck I am high...

I use the EGT1 and EGT2 on my Edge, normally the temps are pretty close, but when in regen, the EGT2 climbs over 1000. Also the smell is a dead give away.

Called the FCA hot line on recal note. Was told the new pumps were not released yet. When I asked how is it that aftermarket suppliers, Genos, for example are offering it up for sale, he responded it isn't the correct pump. I trust Genos to be right and don't believe a world from FCA. If the...

I would second Sag's statememnt. I got mine at Genos, and am sure with their customer service would send me out a new one if thsi happened.