Recent Content by roller1000

where is the connector for the apps located? I am trying to do the suncoast converter rewire to stop the lock and unlock thing on my truck. thanks

thanks for the input! I will have to look a little deeper and get all the facts. thanks

I could not check the high side but the low side is psi high. i am going by the gage that came with the recharge tank. it says its in the red (to high) the pump is kicking in and out fine. thanks

my a/c is taking a little longer to get cold this summer. I got a can of coolent to charge it up . I hooked up the can and before i added anything the pressure was already in the red. Is there a problem with my pump. I do get cold air but it takes a little longer then I think it should. Also...

Thanks for the info!

I installed a airtex fuel pump, relocated down on frame less then a year ago. Up untill now I have been vary happy. turn the key wait to start I have 15 psi it drops down before starting. this is normal I know that. last week I noticed that the pressure was staing up in the teens and not...

I was looking at these injectors from pensocola diesel. for 215$ set of 6 new injectors. sounds good anyone tried them?

I will check that thanks. You don't know if its the low psi return line or the high psi line do you?

Thanks for the good info guys!!!!

Well the good news is with the new steering box the truck has lost most of the slop it had going down the road. I drove to work this moring (I need to make money to feed this money pit) No I didn't meen that. It was growling at me the hole ride in. I will check the fluid when it gets light out...

Well I change the stock steering box out with a reman. This went about as good as it could. Everything went back together nice, I filled the res. with fluid, turned the wheel back and forth many times with the front wheels off the ground. 'this was not easy" I checked to make sure fluid did not...

thanks for the good info

well I have alot of pullers but none that I have ever labeled as a pitman arm puller. How about having to get air out of system after removing the lines?

I am going to replace my steering box tonight. Does anyone have any thoughts to make this job go nice and easy. it does not look that bad. I am just going with a stock lifetime unit from the parts store. $165. 00 thanks

:mad: Does anyone know of someone in MN that does alignments on dodge front ends. THE DEALERSHIPS SUCK. I am looking for the small guy that has done hundreds of these truck, and knows there down falls in the front ends. Everthing looks to be tight but it is still wondering going down the road...