Recent Content by Rpcapogna

Yes shut off and removed key

Nope though it worked. But the message " Oil change required" came back today

Thanks Michael it worked. The CEL light flashes 4 or 5. Must let it finish flashing

Thanks will try again. I didn't get any acknowledge

Hi All! I have this message "oil change required" that keeps coming back. I have changed oil and oil filter and reset it by putting the key in on position and pressed the gas pedal 3 times. It stays off for a day and the message comes right back. Any idea? This is my dually 2007 Ram 3500 6.7.

Thank you appreciate

How to reset message: "Oil change required" Thanks

Thanks appreciate

Thanks man

Hi all. So the EGR valve is usually closed at startup of engine right? When does it actually open? Can you you tell from different sound of the engine? I removed my EGR for cleaning. I tried the solenoid disassembled from the valve but connected to the electric connector, turned the key and it...

Hi all. So the EGR valve is usually closed at startup of engine right? When does it actually open? Can you you tell from different sound of the engine? I removed my EGR for cleaning. I tried the solenoid disassembled from the valve but connected to the electric connector, turned the key and it...

Thanks man I'll keep you posted your response reliefs some pressure thanks again

So I've been driving and was able to get regeneration to complete my codes at the moment are: P1011 fuel pump delivery pressure too low P242F diesel particulate filter restriction- ash accumulation P0471 exhaust pressure sensor range /performance P0087 fuel rail/system pressure -too low From...

So I've been driving and was able to get regeneration to complete my codes at the moment are: P1011 fuel pump delivery pressure too low P242F diesel particulate filter restriction- ash accumulation P0471 exhaust pressure sensor range /performance P0087 fuel rail/system pressure -too low From...

Thanks really appreciate your time to respond