Recent Content by RRekus

What are your thoughts about the Donaldson 2 micron? filters compared to the Air Dog/FASS 1 micron filters? Obviously the 1 micron are better filters for small particles, the 1 micro are getting expensive! I change my filters about twice a year, both water and particle, so I am looking at the...

Tramplineman, Thanks, I had to look at that link a couple extra times...it looks as though the drain line goes back to the valve cover, but I see that what I assume is the other vent line that goes to the crank case vent is there also. I thank you much, for the link, I will now guess that that...

OK, need some help. 05, 3500, DRW, NV5600, 5.9... I bought the Hoesli Diesel catch can and valve cover. How is it installed? Catch can has 3 hoses, 2 from valve cover, 1 for the drain/crankcase return. Are the valve cover vents/hoses, just open to the inside of cover? or do they need to be...

Thanks much... yes this is for access to the bed. Although, I may be still confused on installation. Are most if not all steps attached to the frame rail or else where? Thank again

I just had my COMPLETE system overhauled. Mine did a similar thing, except broke the serpentine belt also. My mechanic.... REAL honest guy, told me when the compressor grenades, it sends metal particles in to the condenser! (this will/may block condenser passages)The company he gets his parts...

Any side hoop steps, how are they installed? On Frame? I want to place hoops between the back passenger doors and the dually fenders. Can anyone suggest a manufacturer and how they did?

OK....tried all the above. Bully dog off, cleaned injectors, additives, etc. I had the injectors replaced, 100+ HP, new installed, ran like a champ, little extra black smoke but ran good........until I got to the light and it stalled. Low pressure fuel is at 15lbs. High pressure rail seems a...

Brothers and sisters all, I am so sorry that it has taken this long to reply. No excuses.... After reading other posts I am starting to think injectors. At this time, there are zero codes. I have the Bully Dog showing none, and cheesy code reader with none. It is running a little better, but...

HELP? I am having issues with the truck... runs like crap, like it is missing. Low fuel, lift pump pressure is varying 8 to 15 pounds, high pressure is going crazy. Just got it back from mechanic, ran fine going home, sat a couple days and now this again. Again, this is why I had it in before...

. 45 ACP when shooting twice is just silly!

Thanks Thanks, for the info! I had thought that if I bore a hole down the center that the DPF would partially work and not throw to many codes. I am aware that the warranty is gone, and I can except that. I have looked at the H&S sims and not researched them enough to drop the $$. At this...

Has anyone partially cleaned out I. E. 3" diameter hole down the center of the DPF filter? I have read many of the threads about deleting this item and all the codes and fines possibly involved. My thought is to take a hole saw down the center of the filter and then place it back on the truck...